HLG-120_12

120W Single Output Switching Power Supply Features : HLG-120 series Universal AC input / Full range Built-in active PFC function High efficiency up to 94% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.9) F 110 M M SELV IP65 IP67 HLG-120-12 A Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL DC VOLTAGE RATED CURRENT RATED POWER HLG-120-12 12V 10A 120W HLG-120-15 15V 8A 120W 150mVp-p 13.5 ~ 17V 4 ~ 8A 2.0% 0.5% HLG-120-20 20V 6A 120W 150mVp-p 17 ~ 22V 3 ~ 6A 1.0% 0.5% 0.5% HLG-120-24 24V 5A 120W 150mVp-p 22 ~ 27V 2.5 ~ 5A 1.0% 0.5% 0.5% HLG-120-30 30V 4A 120W 200mVp-p 27 ~ 33V 2 ~ 4A 1.0% 0.5% 0.5% HLG-120-36 36V 3.4A 122.4W 200mVp-p 33 ~ 40V 1.7 ~ 3.4A 1.0% 0.5% 0.5% HLG-120-42 42V 2.9A 121.8W 200mVp-p 38 ~ 46V 1.4 ~ 2.9A 1.0% 0.5% 0.5% HLG-120-48 48V 2.5A 120W 200mVp-p 43 ~ 53V 1.2 ~ 2.5A 1.0% 0.5% 0.5% HLG-120-54 54V 2.3A 124.2W 200mVp-p 49 ~ 58V 1.1 ~ 2.3A 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V OUTPUT CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS Note.6 SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Can be adjusted by internal potentiometer or through output cable 5 ~ 10A 2.5% 0.5% 1.5% 2.0% Note.7 2500ms, 50ms at full load 16ms at full load Note.4 90 ~ 264VAC 230VAC / 115VAC ; B type 2500ms, 200ms at 95% load 230VAC / 115VAC 230VAC / 115VAC 127 ~ 370VDC 47 ~ 63Hz PF>0.98/115VAC, PF>0.95/230VAC (Please refer to "Power Factor Characteristic" curve) 92% 93.5% 92% 1.4A / 115VAC 0.6A / 230VAC COLD START 75A/230VAC