HLG-150-15

150W Single Output Switching Power Supply Features : HLG-150 series Universal AC input / Full range Built-in active PFC function High efficiency up to 94% Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potential meter IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or PWM signal or resistor) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.10) F 110 M M SELV IP65 IP67 HLG-150-12 A Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistor. SPECIFICATION MODEL DC VOLTAGE RATED CURRENT RATED POWER HLG-150-12 12V 12.5A 150W CONSTANT CURRENT REGION Note.4 6 ~12V HLG-150-15 15V 7.5 ~ 15V 10A 150W 150mVp-p 13.5 ~ 17V 6 ~ 10A 2.0% 0.5% HLG-150-20 20V 10 ~ 20V 7.5A 150W 150mVp-p 17 ~ 22V 4.5 ~ 7.5A 1.0% 0.5% 1.0% HLG-150-24 24V 12 ~ 24V 6.3A 151.2W 150mVp-p 22 ~ 27V 3.8 ~ 6.3A 1.0% 0.5% 0.5% HLG-150-30 30V 15 ~ 30V 5A 150W 200mVp-p 27 ~ 33V 3 ~ 5A 1.0% 0.5% 0.5% HLG-150-36 36V 18 ~ 36V 4.2A 151.2W 200mVp-p 33 ~ 40V 2.5 ~ 4.2A 1.0% 0.5% 0.5% HLG-150-42 42V 21 ~ 42V 3.6A 151.2W 200mVp-p 38 ~ 46V 2.16 ~ 3.6A 1.0% 0.5% 0.5% HLG-150-48 48V 24 ~ 48V 3.2A 153.6W 200mVp-p 43 ~ 53V 1.92 ~ 3.2A 1.0% 0.5% 0.5% HLG-150-54 54V 27 ~ 54V 2.8A 151.2W 200mVp-p 49 ~ 58V 1.68 ~ 2.8A 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V OUTPUT CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(Typ.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION Note.4 Can be adjusted by internal potential meter or through output cable 7.5 ~ 12.5A 2.5% 0.5% 1.5% 2.0% Note.8 2500ms, 80ms at full load 16ms at full load Note.5 90 ~ 264VAC 230VAC / 115VAC ; B type 2500ms, 200ms at 95% load 230VAC / 115VAC 230VAC / 115VAC 127 ~ 370VDC PF 0.98/115VAC at full load and rated output voltage 93.5% 93.5% 93.5% PF 0.9 at 60 ~ 100% load 94% 94% 94% 47 ~ 63Hz PF 0.95/230VAC 92% 93% 92.5% 1.7A / 115VAC 0.75A / 230VAC COLD START 75A/230VAC