HLG-240H_12

240W Single Output Switching Power Supply Features : HLG-240H series Universal AC input / Full range (up to 305VAC) Built-in active PFC function Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.10) F 110 SELV IP65 IP67 HLG-240H-12 A Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potentiometer. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL DC VOLTAGE RATED CURRENT RATED POWER HLG-240H-12 12V 16A 192W CONSTANT CURRENT REGION Note.4 6 ~12V HLG-240H-15 15V 7.5 ~ 15V 15A 225W 150mVp-p HLG-240H-20 20V 10 ~ 20V 12A 240W 150mVp-p HLG-240H-24 24V 12 ~ 24V 10A 240W 150mVp-p HLG-240H-30 30V 15 ~ 30V 8A 240W 200mVp-p HLG-240H-36 36V 18 ~ 36V 6.7A 241.2W 250mVp-p HLG-240H-42 42V 21 ~ 42V 5.72A 240.24W 250mVp-p HLG-240H-48 48V 24 ~ 48V 5A 240W 250mVp-p HLG-240H-54 54V 27 ~ 54V 4.45A 240.3W 350mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT VOLTAGE ADJ. RANGE Note.6 11.2 ~ 12.8V 14 ~ 16V CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS Note.7 SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE Note.4 Note.8 18.6 ~ 21.4V 22.4 ~ 25.6V 28 ~ 32V 6 ~ 12A 1.0% 0.5% 1.0% 5 ~ 10A 1.0% 0.5% 0.5% 4 ~ 8A 1.0% 0.5% 0.5% 33.5 ~ 38.5V 39 ~ 45V 3.3 ~ 6.7A 1.0% 0.5% 0.5% 44.8 ~ 51.2V 50 ~ 57V 2.23 ~ 4.45A 1.0% 0.5% 0.5% Can be adjusted by internal potentiometer or through output cable 8 ~ 16A 2.5% 0.5% 7.5 ~ 15A 2.0% 0.5% 2.86 ~ 5.72A 2.5 ~ 5A 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 1.5% 2.0% Note.9 2500ms, 80ms at full load 15ms at full load Note.5 90 ~ 305VAC 230VAC /115VAC 230VAC /115VAC 127 ~ 431VDC 47 ~ 63Hz PF>0.98/115VAC, PF>0.95/230VAC at full load (Please refer to "Power Factor Characteristic" curve) 90% 92% 90% 4A / 115VAC 2A / 230VAC COLD START 75A/230VAC