HLP-40H-54

40W Single Output Switching Power Supply Features : HLP-40H series Universal AC input / Full range (up to 305VAC) Built-in active PFC function, PF>0.95 Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection Output constant current level adjustable 100% full load burn-in test Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for built in LED lighting system Suitable for dry / damp location 3 years warranty M M SELV ( for 48V,54V only) ( except for 48V,54V ) SPECIFICATION MODEL DC VOLTAGE RATED CURRENT RATED POWER VOLTAGE ADJ. RANGE OUTPUT CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) LEAKAGE CURRENT OVER CURRENT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Note.4 HLP-40H-12 HLP-40H-15 HLP-40H-20 HLP-40H-24 HLP-40H-30 HLP-40H-36 HLP-40H-42 HLP-40H-48 HLP-40H-54 12V 3.33A 40W 15V 9 ~ 15V 2.67A 40W 150mVp-p 20V 12 ~ 20V 2A 40W 150mVp-p 17 ~ 22V 1.2 ~ 2A 1.0% 0.5% 24V 14.4 ~ 24V 1.67A 40.1W 150mVp-p 22 ~ 27V 1 ~ 1.67A 1.0% 0.5% 0.5% 30V 18 ~ 30V 1.34A 40.2W 200mVp-p 27 ~ 33V 0.8 ~ 1.34A 1.0% 0.5% 0.5% 36V 21.6 ~ 36V 1.12A 40.3W 200mVp-p 33 ~ 40V 42V 25.2 ~ 42V 0.96A 40.3W 300mVp-p 40 ~ 46V 48V 28.8 ~ 48V 0.84A 40.3W 300mVp-p 44 ~ 53V 54V 32.4 ~ 54V 0.75A 40.5W 300mVp-p 49 ~ 58V 0.45 ~ 0.75A 1.0% 0.5% 0.5% CONSTANT CURRENT REGION Note.4 7.2 ~12V RIPPLE & NOISE (max.) Note.2 150mVp-p 10.8 ~ 13.5V 13.5 ~ 17V 2 ~ 3.33A 2.5% 0.5% 1.6 ~ 2.67A 2.0% 0.5% Can be adjusted by internal potentiometer or through output cable 0.67 ~ 1.12A 0.58 ~ 0.96A 0.5 ~ 0.84A 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.5% 1.0% 2.0% Note.6 1500ms, 80ms / 115VAC at full load 16ms/230VAC Note.5 90 ~ 305VAC 1000ms, 80ms / 230VAC at full load 16ms/115VAC at full load 127 ~ 431VDC 47 ~ 63Hz PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) 88% 87% 0.43A / 115VAC 0.24A / 230VAC COLD START 70A/230VAC