LCM-40U

35W Multiple-Stage Constant Current Mode LED Driver LCM-40U Standard series Optional Optional (for EO-Type only) ■ Features Constant Current mode output with multiple levels selectable by dip switch Plastic housing with class II design Built-in active PFC function Functions: 3 in 1 dimming (dim-to-off); ■ Applications LED indoor lighting LED office lighting LED architectural lighting LED panel lighting Auxiliary DC output; synchronization up to 10 units Optional: Wireless LED driver with integrated EnOcean module 3 years warranty ■ Description LCM-40U series is a 35W LED AC/DC constant current mode output LED driver featuring the multiple levels selectable by dip switch. LCM-40U operates from 90～132VAC and offers different current levels ranging between 350mA and 1050mA. Thanks to the efficiency up to 87.5%, with the fanless design, the entire series is able to operate for -30℃~+90℃ case temperature under free air convection. LCM-40U is equipped with various functions, such as the dimming function and synchronization, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding LCM - 40U EO: Optional wireless EnOcean module Output wattage Series name Type Blank EO Function 3 in 1 dimming (dime-to-off) Wireless driver with integrated EnOcean module Note In Stock By r equest File Name:LCM-40U-SPEC 2016-11-23 35W Multiple-Stage Constant Current Mode LED Driver LCM-40U series SPECIFICATION MODEL LCM-40U Current level selectable via DIP switch, please refer to”DIP SWITCH TABLE” section CURRENT LEVEL OUTPUT 350mA RATED POWER 35W DC VOLTAGE RANGE 2 ~ 100V OPEN CIRCUIT VOLTAGE (max.) 110 CURRENT RIPPLE Note.6 CURRENT TOLERANCE 600mA 700mA(default) 900mA 1050mA 2 ~ 70V 2 ~ 59V 2 ~ 50V 2 ~ 39V 2 ~ 34V 76V 5.0% max. @rated current ±5% AUXILIARY DC OUTPUT Nominal 12V(deviation 11.4~12.6V)@50mA SETUP TIME 1000ms / 115VAC Note.3 VOLTAGE RANGE INPUT 500mA Note.2 90 ~ 132VAC 127 ~ 186VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF≧0.98/115 VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 20%(@load≧60%) TOTAL HARMONIC DISTORTION (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) EFFICIENCY (Typ.) Note.4 87.5% AC CURRENT (Typ.) 0.43A/115VAC INRUSH CURRENT (Typ.) COLD START 15A(twidth=270μs measured at 50% Ipeak) at 115VAC; Per NEMA 410 MAX. No. of PSUs on 16A CIRCUIT BREAKER 22 units (circuit breaker of type B) / 38 units (circuit breaker of type C) at 115VAC LEAKAGE CURRENT