LPV-100-36

100W Single Output Switching Power Supply Features : Constant voltage design L P V- 1 0 0 series Universal AC input / Full range Fully encapsulated with IP67 level (Note.8) Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Fully isolated plastic case Cooling by free air convection 100% full load burn-in test Low cost, high reliability Suitable for LED lighting and moving sign applications(Note 7.) 2 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE LPV-100-5 5V 12A 0 ~ 12A 60W 8.0% 1.0% 6.0% 50ms/230VAC Note.4 90 ~ 264VAC IP67 LPV-100-12 12V 8.5A 0 ~ 8.5A 102W 120mVp-p 5.0% 2.0% 2000ms, 25ms / 115VAC 14ms/115VAC at full load 127 ~ 370VDC 85% 87% 75A/230VAC 88% 88% 89% LPV-100-15 15V 6.7A 0 ~ 6.7A 100.5W 120mVp-p LPV-100-24 24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p LPV-100-36 36V 2.8A 0 ~ 2.8A 100.8W 150mVp-p LPV-100-48 48V 2.1A 0 ~ 2.1A 100.8W 150mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p Note.6 2000ms, 25ms / 230VAC 47 ~ 63Hz 80% 2.2A/115VAC 1.2A/230VAC COLD START 30A/115VAC 0.25mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover -25 ~ +70 -40 ~ +80 0.03%/ (Refer to output load derating curve) , 10 ~ 95% RH (0 ~ 50 ) 20 ~ 90% RH non-condensing 41.4 ~ 48.6V 55.2 ~ 64.8V 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes IP67 approved; Design refer to TUV EN60950-1, EN61347-2-13 I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-3-2 Class A( 80% load), EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, heavy industry level, criteria A 703Khrs min. MIL-HDBK-217F (25 ) 190*52*37mm (L*W*H) 0.63Kg;20pcs/13.6Kg/0.57CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. In the European market this product is only suitable for LED lighting applications that don t have to comply with the harmonic current requirements of EN61000-3-2 Class C. 8. Suitable for indoor use or outdoor use without direct sunlight exposure. ‘ File Name:LPV-100-SPEC 2011-03-09 100W Single Output Switching Power Supply Mechanical Specification L P V- 1 0 0 Case No. 999A series Unit:mm 300 20 190 3.65 300 20 3.57 4.5 3.65 DC OUT AC/N(Blue) AC/L(Brown) 3.57 18AWG 4.5 52 14AWG Block Diagram fosc : 65KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING RECTIFIERS & FILTER 8 37 AC IN +V(Red) -V(Black) +V -V O.L.P. PWM CONTROL DETECTION CIRCUIT O.V.P. Derating Curve Static Characteristics 100 Others 100 90 80 80 60 5V,12V 70 LOAD LOAD (%) 40 LOAD (%) -15 0 15 30 40 50 60 70 (HORIZONTAL) 60 50 40 20 -25 90 100 125 135 145 155 165 175 180 200 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:LPV-100-SPEC 2011-03-09