PID-250D

250W Isolated Dual Output with PFC Function Features : Universal AC input / Full range Isolated output & GND for CH1,CH2 Built-in active PFC function, PF>0.92 PID-250 Protections:Short circuit / Overload / Over voltage / Over temperature Remote control for CH1 Peak load 170% for CH1 within 10 sec. Cooling by free air convection 100% full load burn-in test 3 years warranty SPECIFICATION MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE PID-250A CH1 12V 0 ~ 15A 205W 50mVp-p 4.75 ~ 5.25V 2.0% 0.5% 2.0% CH2 5V 0 ~ 5A PID-250B CH1 24V 0 ~ 9.4A (Peak 16.7A) 250.6W 150mVp-p 21.6 ~ 26.4V 2.0% 0.5% 1.0% 1200ms, 60ms/230VAC 50mVp-p 4.75 ~ 5.25V 2.0% 0.5% 2.0% CH2 5V 0 ~ 5A PID-250C CH1 36V 0 ~ 6.3A (Peak 11.1A) 251.8W 200mVp-p 32.4 ~ 39.6V 2.0% 0.5% 1.0% 50mVp-p 4.75 ~ 5.25V 2.0% 0.5% 2.0% CH2 5V 0 ~ 5A PID-250D CH1 48V 0 ~ 4.7A (Peak 8.4A) 250.6W 200mVp-p 43.2 ~ 52.8V 2.0% 0.5% 1.0% 50mVp-p 4.75 ~ 5.25V 2.0% 0.5% 2.0% CH2 5V 0 ~ 5A 15A(Peak 20A) 5A Note.6 (Peak 20A) 9.4A(Peak 16.7A) 5A 6.3A(Peak 11.1A) 5A 4.7A(Peak 8.4A) 5A RIPPLE & NOISE (max.) Note.2 120mVp-p 10.8 ~ 13.2V VOLTAGE TOLERANCE Note.3 3.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT 0.5% 1.0% 30ms at full load Note.5 90 ~ 264VAC 47 ~ 63Hz 2500ms, 60ms/115VAC 127 ~ 370VDC PF 0.97/115VAC at full load 86% 1.5A/230VAC 86% 86% PF 0.92/230VAC 83% 3A/115VAC COLD START 58A/230VAC