PLN-45-24

45W Single Output LED Power Supply Features : PLN-45 series Universal AC input / Full range (up to 295VAC) Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit with adjustable OCP level Fully isolated plastic case with IP64 level Built-in active PFC function IP64 design for indoor or outdoor installations Pass LPS UL1310 Class 2 power unit 100% full load burn-in test High reliability Suitable for LED lighting and moving sign applications (Note.2) Compliance to worldwide safety regulations for lighting 2 years warranty F 110 M M SELV LPS ( for 48V only) ( except for 48V ) IP64 PLN-45-36 36V 27 ~ 36V 1.25A 0 ~ 1.25A 45W 3.6Vp-p 32.5 ~ 39V PLN-45-48 48V 36 ~ 48V 0.95A 0 ~ 0.95A 45.6W 4.6Vp-p 43.6 ~ 51.8V SPECIFICATION MODEL DC VOLTAGE PLN-45-12 12V CONSTANT CURRENT 9 ~ 12V OPERATION VOLTAGE Note.6 RATED CURRENT CURRENT RANGE RATED POWER OUTPUT 3.8A 0 ~ 3.8A 45.6W 11.5 ~ 13V PLN-45-15 15V 11.25 ~15V 3A 0 ~ 3A 45W 2.4Vp-p 14.5 ~ 16.2V PLN-45-20 20V 15 ~ 20V 2.3A 0 ~ 2.3A 46W 1.8Vp-p 19.5 ~ 22V PLN-45-24 24V 18 ~24V 1.9A 0 ~ 1.9A 45.6W 2.7Vp-p 24 ~ 26V PLN-45-27 27V 20.25 ~27V 1.7A 0 ~ 1.7A 45.9W 2.7Vp-p 25 ~ 30V RIPPLE & NOISE (max.) Note.2 2Vp-p VOLTAGE ADJ. RANGE Note.5 Can be adjusted by internal potentiometer SVR1 10% 3.0% 5.0% 1500ms / 230VAC 3000ms / 115VAC at full load CURRENT ADJ. RANGE Note.5 3% ~ -25%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (max.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Note.4 90 ~ 295VAC 127 ~ 417VDC 47 ~ 63Hz PF>0.92/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) 83.5% 0.55A/115VAC 40A/230VAC 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 13.8 ~ 16V 17.5 ~ 21V 22.8 ~ 25V 28 ~ 32V Protection type : Shut down o/p voltage, re-power on to recover 95 10 (TSW1) detect on heatsink of power transistor (Refer to "Derating Curve") Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +50 20 ~ 95% RH non-condensing -40 ~ +80 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL879, UL8750, UL1310 Class 2, TUV EN61347-1, EN61347-2-13 independent CAN/CSA C22.2 No. 223-M91(except for 48V); J61347-1, J61347-2-13, IP64 approved I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 75% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level, criteria A 497.8Khrs min. MIL-HDBK-217F (25 ) 181*61.5*35mm (L*W*H) 0.5Kg; 24pcs/13Kg/0.75CUFT 31 ~ 35V 41 ~ 46V 54 ~ 60V 85% 0.25A/230VAC 86.5% 86.5% 86.5% 87.5% 87.5%