RCP-1000-12

1000 ~ 3000W Front End Power System Features : Universal AC input / Full range Built-in 5V/0.3A auxiliary power Built-in active PFC function, PF>0.96 RCP series Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan with fan speed control Low profile:1U height Active current sharing up to 3000W (3 units)in 19" rack, 3 racks max. can be operated in parallel (up to 8 units) (Note.7) Remote control for single unit Built-in remote sense function Output voltage trimming function Hot-swap operation Optional I2C serial data bus AC OK & DC OK signal Internal ORing diode 3 years warranty SELECTION GUIDE Single Unit: RCP-1000- 12 - C 2 Rack: RCP-1U I C: With I C Interface 2 -: Without I C Interface Output Voltage I: AC Inlet(IEC320-C14) T: Terminal Block C: With I C Interface -: Without I 2 C Interface Output Voltage I: AC Inlet(IEC320-C14) T: Terminal Block 2 Whole System: RCP-3K1U I - 12 - C SPECIFICATION - Single Unit MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE RCP-1000-12 12V 60A 0 ~ 60A 720W 11.6 ~ 12.4V 0.5% 0.5% 1000ms, 60ms/230VAC at full load 16ms/230VAC at full load Note.5 90 ~ 264VAC RCP-1000-24 24V 40A 0 ~ 40A 960W 200mVp-p 23.2 ~ 24.8V 1.0% 0.5% 0.5% RCP-1000-48 48V 21A 0 ~ 21A 1008W 300mVp-p 46.3 ~ 49.7V 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE TOLERANCE Note.3 1.0% 127 ~ 370VDC 87% 10.5A/115VAC 89% 11A/115VAC 47 ~ 63Hz 81% 8.5A/115VAC COLD START 50A