RCP-2000

2000W Front End Power Supply Features : RCP-2000 series Universal AC input / Full range Built-in 5V/0.3A, 12V/0.8A auxiliary power Built-in active PFC function, PF>0.98 High efficiency up to 92% Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage / Over temperature High Power density 21.4W/inch3 Forced air cooling by built-in DC fan with fan speed control Low profile:1U height Remote control for single unit Built-in remote sense function Output voltage trimming function Hot-swap operation PMBus serial communication AC OK, DC OK signal, fan fail, OTP alarm signal Internal OR-ing FET 3 years warranty Description : The RCP-2000 series are state of the art AC/DC frond-end rectifiers with 1U compact size and 21.4 W/in3 of high power density. They can provide up to 2000W per unit for the applications of servers, information technology equipment, networking, telecommunications, and wide range of industrial applications using distributed power architecture. Equipped with hot-swap function and PMBus communication protocol, RCP-2000 can be assembled in 1U 19” rack and controlled/monitored by external device such as monitoring unit (RCP-CMU-1) or PC. SPECIFICATION - Single Unit MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE AUXILIARY POWER REMOTE ON/OFF CONTROL REMOTE SENSE DC OK SIGNAL AC OK SIGNAL OUTPUT VOLTAGE TRIM OVER TEMP WARNING FAN FAIL SIGNAL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION RCP-2000-12 12V 100A 0 ~ 100A 1200W 10.5 ~ 14V 1.0% 1.0% 1500ms, 60ms/230VAC at full load 16ms/230VAC at 75% load Note.5 90 ~ 264VAC RCP-2000-24 24V 80A 0 ~ 80A 1920W 200mVp-p 21 ~ 28V 1.0% 0.5% 0.5% 10ms/230VAC at full load RCP-2000-48 48V 42A 0 ~ 42A 2016W 300mVp-p 42 ~ 56V 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE TOLERANCE Note.3 2.0% 127 ~ 370VDC 47 ~ 63Hz 0.98/230VAC at full load 86% 13A/115VAC COLD START 50A