RPS-120-24

120W Reliable Green Medical Power Supply RPS-120 series User’s Manual +       +  ■  ‧ ‧  ‧ ‧ ‧ⅠⅡ ‧ ‧Extremely low leakage current ‧ ‧ ‧ ‧ ■  ‧ ‧ ‧ ‧ ‧ ■    ■     ⅠⅡ 150μ  ■        { Blank : PCB type -C : Enclosed type    File Name:RPS-120-SPEC 2022-03-18 RPS-120 120W Reliable Green Medical Power Supply series SPECIFICATION MODEL RPS-120-12□ RPS-120-15□ RPS-120-24□ RPS-120-27□ RPS-120-48□ 12V 15V 24V 27V 48V 10A 8A 5A 4.5A 2.5A 5.6A 3.5A 3.15A 1.75A 120W 120W 121.5W 120W 84W 84W 85W 84W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE DC VOLTAGE CURRENT RATED POWER OUTPUT 10CFM Convection 7.0A 10CFM 120W Convection 84W 14.3~15.8V 22.8~25.2V 25.6 ~ 28.4V 45.6 ~50.4V VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 500ms, 30ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC 90% 91% LINE REGULATION 11.4~12.6V 10ms/115VAC at full load VOLTAGE RANGE Note.4 80 ~ 264VAC FREQUENCY RANGE INPUT 113 ~ 370VDC 47 ~ 63Hz EFFICIENCY (Typ.) 89% AC CURRENT (Typ.) 2.1A/115VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC LEAKAGE CURRENT(max.) Note.5 Earth leakage current < 150μA/264VAC , Touch current < 80μA/264VAC OVERLOAD PROTECTION 500ms, 30ms/115VAC at full load 89% OVER TEMPERATURE FUNCTION FAN SUPPLY 60A/230VAC 115~150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 16.5 ~ 19.5V 13.2 ~ 15.6V OVER VOLTAGE 90% 1.2A/230VAC 26.4 ~ 31.2V 29.7 ~ 35V 52.8 ~ 62.4V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover 12V@0.5A for driving a fan ; tolerance -15% ~ +10% at main output 40% rated current (10CFM) WORKING TEMP. -30 ~ +70℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes OPERATING ALTITUDE Note.6 4000 meters SAFETY STANDARDS IEC60601-1, TUV BS EN/EN60601-1, EAC TP TC 004 , UL ANSI / AAMI ES60601-1 (3.1 version), CAN/CSA-C22.2 No. 60601-1:14 - Edition 3 approved; Design refer to BS EN/ EN60335-1 ISOLATION RESISTANCE Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP WITHSTAND VOLTAGE I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION SAFETY & EMC (Note 7) EMC IMMUNITY OTHERS NOTE Parameter Standard Test Level / Note Conducted emission BS EN/EN55011 (CISPR11) Class B Radiated emission BS EN/EN55011 (CISPR11) Class B Harmonic current Voltage flicker BS EN/EN60601-1-2 BS EN/EN61000-3-2 Class A BS EN/EN61000-3-3 ----- Parameter Standard Test Level / Note ESD BS EN/EN61000-4-2 Level 4, 15KV air ; Level 4, 8KV contact RF field susceptibility BS EN/EN61000-4-3 Level 3, 10V/m( 80MHz~2.7GHz ) Table 9, 9~28V/m( 385MHz~5.78GHz ) EFT bursts Surge susceptibility Conducted susceptibility BS EN/EN61000-4-4 Level 3, 2KV BS EN/EN61000-4-5 Level 4, 4KV/Line-FG; 2KV/Line-Line BS EN/EN61000-4-6 Level 3, 10V Magnetic field immunity BS EN/EN61000-4-8 Voltage dip, interruption BS EN/EN61000-4-11 Level 4, 30A/m 100% dip 1 periods, 30% dip 25 periods, 100% interruptions 250 periods MTBF 3732.9K hrs min. DIMENSION (L*W*H) PCB:101.6*50.8*29mm or 4" * 2" *1.141" inch ; Enclosed type:103.4*62*40mm or 4.07" * 2.44" *1.57" inch PACKING PCB:0.15Kg; 72pcs/11.8Kg/0.84CUFT ; Enclosed type:0.24Kg; 60pcs/15.4Kg/1.06CUFT Telcordia SR-332 (Bellcore) ; 653.6K hrs min. MIL-HDBK-217F (25℃)  μ μ     6. ℃℃    (as available on http://www.meanwell.com) ※：https://www.meanwell.com/serviceDisclaimer.aspx File Name:RPS-120-SPEC 2022-03-18 RPS-120 120W Reliable Green Medical Power Supply series Block Diagram fosc : 65KHz EMI FILTER & RECTIFIER EMI FILTER I/P POWER SWITCHING RECTIFIERS & FILTER RECTIFIERS & FILTER FG O.T.P. +V -V +12V FAN SUPPLY DETECTION CIRCUIT O.L.P. CONTROL O.V.P. Derating Curve 100 With 10CFM Fan for RPS-120(-C) 80 70 Convection for RPS-120(-C) 24~48V LOAD (%) 60 40 Convection for RPS-120(-C) 12~15V 20 -30 0 10 20 30 40 45 50 70 (HORIZONTAL) 60 AMBIENT TEMPERATURE (℃) Output Derating VS Input Voltage 100 90 80 LOAD (%) 70 60 50 40 80 90 115 120 130 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:RPS-120-SPEC 2022-03-18 RPS-120 120W Reliable Green Medical Power Supply series Mechanical Specification RPS-120 (PCB Type) Top View 50.8 FAN 5cm 3.175 ※Note 10CFM Air flow direction 1 2 CN101 HS1 44.45 3 2 1 3.175 SVR1 LED 1 2 3 4 HS2 FS1 T4A/250V CN2 FS2 T4A/250V 95.25 4 -ψ 3.3 29 101.6 3 max. 50.8 CN1 Side View File Name:RPS-120-SPEC 2022-03-18 RPS-120 120W Reliable Green Medical Power Supply series Mechanical Specification Case No.245A RPS-120-C (Enclosed Type) Unit:mm Side View Top View Side View Side View 103.4 78 12.7 100 1.7 2-R1.75 20 25 40 2-M3 L=4 Side View 51.7 FAN 10CFM 5cm Air flow direction CN101 CN1 12 1 2 3 4 62 3 2 1 CN2 30.8 2-M3 L=2 24.2 55 Bottom View File Name:RPS-120-SPEC 2022-03-18 120W Reliable Green Medical Power Supply RPS-120 series AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. 1 2 3 Assignment AC/N No Pin AC/L Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent DC Output Connector (CN2) : JST B4P-VH or equivalent Pin No. 1,2 3,4 Assignment +V -V Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent FAN Connector(CN101) : JST S2B-PH-K-S or equivalent Pin No. Assignment 1 DC COM(FAN-) 2 +12V(FAN+) Mating Housing Terminal JST PHR-2 or equivalent JST SPH-002T-P0.5S or equivalent 1.HS1,HS2 cannot be shorted. 2.HS1 must have safety isolation distance with system case. ※Note : 1. The FAN supply is designed to serve as the source of the additive external fan for the cooling of the power supply, enabling the full load delivery and assuring the best life span of the product. Please do not use this FAN supply to drive other devices. 2.The PCB type(Blank type)model delivers EMI Class B for both conducted emission and radiated emission for the power supply, when configured into either Class Ⅰ(with FG) or Class Ⅱ (no FG) system. 3.The Enclosed type(-C type) model is not suitable for the configuration within a Class Ⅱ (no FG) system but is suggested to used within a Class Ⅰ(with FG) system. Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:RPS-120-SPEC 2022-03-18