RPTG-160D

R P T- 1 6 0 160W Triple Output Medical Type series ■ Features : Universal AC input / Full range Built-in active PFC function Protections: Short circuit / Overload / Over voltage / Over temperature 5"x3" compact size Free air convection for 100W and 145W with 20.5 CFM forced air Medical safety approved (2 x MOPP between primary to secondary) With power good and fail signal output No load power consumption under 0.75W by PS-ON control (G model) Standby 5V@0.8A with fan, @0.6A without fan (G model) Suitable for BF application with appropriate system consideration 3 years warranty RPT G G: With 5Vsb & no load power consumption < 0.75 W Blank: Basic function (without 5Vsb) 160A EN 60601-1 IEC 60601-1 8 SPECIFICATION RPT□-160A MODEL OUTPUT RPT□-160B RPT□-160C RPT□-160D OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V RATED CURRENT (20.5CFM) 14A 5.5A 1A 14A 5A 1A 14A 3.6A 1A 11A 5A 1.2A CURRENT RANGE (convection) 0.6 ~ 9A 0.2 ~ 3.8A 0.1 ~ 0.6A 0.6 ~ 9A 0.2 ~ 3.4A 0.1 ~ 0.8A 0.6 ~ 9A 0.1 ~ 2.6A 0.1 ~ 0.8A 0.3 ~ 8A CURRENT RANGE (20.5CFM) 0.6 ~ 14A 0.2 ~ 5.5A 0.1 ~ 1A 0.6 ~ 14A 0.2 ~ 5A RATED POWER (convection) Note.7 98.6W 98.4W 99W 98.2W RATED POWER (20.5CFM) Note.8 145W 146W 143W 147.8W 0.1 ~ 1A CH3 0.2 ~ 2.6A 0.15 ~ 1A 0.6 ~ 14A 0.1 ~ 3.6A 0.1 ~ 1A 0.3 ~ 11A 0.2 ~ 5A 0.15 ~ 1.2A RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 120mVp-p 100mVp-p 120mVp-p 120mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE CH1:5 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±2.0% ±5.0% -5,+7% ±2.0% ±5.0% -4,+5% ±2.0% ±4.0% ±8.0% ±2.0% ±5.0% +7,-5% LINE REGULATION ±0.5% ±1.0% ±1.0% ±0.5% ±1.0% ±1.0% ±0.5% ±1.0% ±1.0% ±0.5% ±1.0% ±1.0% LOAD REGULATION ±1.5% ±3.0% -5,+6% ±1.5% ±3.0% -4,+5% ±2.0% ±3.0% ±8.0% ±1.5% ±3.0% -3,+4% SETUP, RISE TIME 1800ms, 30ms/230VAC 16ms/230VAC/115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT Note.6 90 ~ 264VAC 47 ~ 63Hz POWER FACTOR (Typ.) EFFICIENCY (Typ.) PF>0.93/230VAC 84% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.8A/115VAC 0.9A/230VAC COLD START 35A/115VAC 70A/230VAC PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING HUMIDITY SAFETY STANDARDS ISOLATION LEVEL SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF NOTE 84% 83% 83% 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover TSW1: Shut down o/p voltage, recovers automatically after temperature goes down TSW2: Shut down o/p voltage, re-power on to recover 5VSB : 5V@0.6A without fan, 0.8A with fan 20.5CFM ; tolerance ± 2%, ripple : 50mVp-p(max.) 5V STANDBY (G model) PS-ON INPUT SIGNAL (G model) Power on: PS-ON = "Hi" or " > 2 ~ 5V" ; Power off: PS-ON = "Low" or " < 0 ~ 0.5V" PF>1ms POWER GOOD / POWER FAIL 500ms>PG>10ms -20 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OTHERS PF>0.98/115VAC at full load Note.9 Earth leakage current < 200 μA/264VAC , Touch current < 100 μA/264VAC OVERLOAD (Note 4) 127 ~ 370VDC FREQUENCY RANGE LEAKAGE CURRENT FUNCTION 3500ms, 30ms/115VAC at full load DIMENSION PACKING 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1 approved Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55011 (CISPR11), EN55032 (CISPR32) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A 191.4K hrs min. MIL-HDBK-217F (25℃) 127*76.2*34.6mm (L*W*H) 0.33Kg; 36pcs/12.9Kg/0.79CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. HS1,HS2 & HS3 can not be shorted. 6. Derating may be needed under low input voltages. Please check the derating curve for more details. 7. The rated power includes 5Vsb @ 0.6A. 8. The rated power includes 5Vsb @ 0.8A. 9. Touch current was measured from primary input to DC output. File Name:RPT-160-SPEC 2017-07-14 R P T- 1 6 0 160W Triple Output Medical Type Mechanical Specification Unit:mm FAN AC Input Connector (CN1) : JST B3P-VH or equivalent 5cm Pin No. 1 2 3 5 20.5CFM min. SVR1 M1 76.2 Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent DC Output Connector (CN2) : JST B8P-VH or equivalent 1 2 66.2 Assignment AC/L No Pin AC/N CN3 HS1 1 2 3 HS3 FS2 Pin No. 1,2,3,4 5,6 7 8 1 2 3 4 5 6 7 8 HS2 FS1 CN1 series CN2 M2 5 4 -ψ 3.5 117 Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent Power Good Connector(CN3):JST B2B-XH or equivalent CN901 LED CN901 Assignment COM CH1 CH2 CH3 Pin No. Status Mating Housing Terminal 1 2 PG GND JST XHP or equivalent JST SXH-001T-P0.6 or equivalent 1234 5VSB Connector(CN901) : JST B-XH or equivalent 127 Pin No. 1 2,4 3 PS/ON 34.6 5mA(max.) GND Assignment PS/ON GND 5VSB Mating Housing Terminal JST XHP or equivalent JST SXH-001T or equivalent 3 max. 1.HS1,HS2,HS3 can not be shorted 2.M1 and M2 are Safety ground and should all be grounded. Block Diagram POWER SWITCHING PWM CONTROL RECTIFIERS & PFC EMI FILTER I/P FG POWER SWITCHING O.L.P. fosc :100KHz +5VSB DETECTION CIRCUIT RECTIFIERS & FILTER RECTIFIERS & FILTER RECTIFIERS & FILTER RECTIFIERS & FILTER PG DETECTION CIRCUIT CONTROL +5VSB V3 +V2 +V1 COM PG O.V.P. PS/ON CONTROL Derating Curve PS/ON Output Derating VS Input Voltage 100 100 With FAN 90 80 80 70 Without FAN LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:RPT-160-SPEC 2017-07-14