RSD-150D-5

150W Railway Single Output DC-DC Converter Features : 2:1 wide input range RSD-150 series Protections: Short circuit / Overload / Over voltage / Over temperature / Input reverse polarity 4000VDC I/O isolation Cooling by free air convection Built-in constant current limiting circuit 1U low profile 36mm Compliance to EN50155 railway standard All using 105 long life electrolytic capacitors LED indicator for power on 100% full load burn-in test 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT CONTINUOUS 1 SEC. EFFICIENCY (Typ.) RSD-150B-5 RSD-150B-12 RSD-150B-24 RSD-150C-5 RSD-150C-12 RSD-150C-24 RSD-150D-5 RSD-150D-12 RSD-150D-24 5V 30A 0 ~ 30A 150W 2.0% 0.5% 1.0% 12V 12.5A 0 ~ 12.5A 150W 120mVp-p 2.0% 0.3% 1.0% 24V 6.3A 0 ~ 6.3A 151.2W 150mVp-p 2.0% 0.2% 1.0% 5V 30A 0 ~ 30A 150W 100mVp-p 2.0% 0.5% 1.0% 12V 12.5A 0 ~ 12.5A 150W 120mVp-p 2.0% 0.3% 1.0% 24V 6.3A 0 ~ 6.3A 151.2W 150mVp-p 2.0% 0.2% 1.0% 5V 30A 0 ~ 30A 150W 100mVp-p 2.0% 0.5% 1.0% 12V 12.5A 0 ~ 12.5A 150W 120mVp-p 2.0% 0.2% 1.0% 24V 6.3A 0 ~ 6.3A 151.2W 150mVp-p 2.0% 0.2% 1.0% RIPPLE & NOISE (max.) Note.2 100mVp-p 800ms, 50ms at full load 3 ~ 30ms @ full load ; B/C- type comply with S1 level ; D-type comply with S2 level 16.8 ~ 31.2VDC 14.4 ~ 33.6VDC 89% 7.3A/24V 45A/24VDC 90% 7.3A/24V 90% 7.3A/24V 33.6 ~ 62.4VDC 28.8 ~ 67.2VDC 90% 3.6A/48V 45A/48VDC 92% 3.6A/48V 91% 3.6A/48V 67.2 ~ 143VDC 57.6 ~ 154VDC 90% 1.5A/110V 45A/110VDC 92% 1.5A/110V 91% 1.5A/110V DC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & EMC (Note 4) 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 7V 13.8 ~ 16.2V 27.6 ~ 32.4V 5.75 ~ 7V 13.8 ~ 16.2V 27.6 ~ 32.4V 5.75 ~ 7V 13.8 ~ 16.2V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover 115 5 (TSW1) detect on main power transformer Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +55 -40 ~ +85 (no derating) ; +70 , 10 ~ 95% RH @ 60% load by free air convection ; +70 (no derating with external base plate) 20 ~ 90% RH non-condensing 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ; Mounting : compliance to IEC61373 Meet IEC60950-1(LVD) I/P-O/P:4KVDC I/P-FG:2.5KVDC O/P-FG:2.5KVDC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Conduction Emission: Class A, Radiation Emission: Class B ; EN50121-3-2 Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A ; EN50121-3-2 Meet EN50155 / IEC60571 including IEC61373 for shock & vibration, EN50121-3-2 for EMC 223.2K hrs min. MIL-HDBK-217F (25 189*77*36mm (L*W*H) 0.8Kg; 15pcs/13Kg/0.75CUFT ) ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY RAILWAY STANDARD MTBF OTHERS DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 24,48,110VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RSD-150-SPEC 2011-12-01 150W Railway Single Output DC-DC Converter Mechanical Specification 10max. RSD-150 Case No.978A 15max. series Unit:mm 1.7 5 183 189 183 LED 3 3 I/P O/P 9.5 1 2 1 2 10 13 63 77 8.2 3 4-R1.75 Input Terminal Pin No. Assignment : Pin No. 1 2 3 Assignment DC INPUT V+ DC INPUT VFG Output Terminal Pin No. Assignment : Pin No. 1 2 Assignment DC OUTPUT -V DC OUTPUT +V Block Diagram RECTIFIERS & FILTER RECTIFIERS & FILTER 7 36 2-R 26 fosc : 130KHz I/P EMI FILTER POWER SWITCHING +V -V FG O.L.P. O.T.P. PWM CONTROL O.V.P. DETECTION CIRCUIT Derating Curve 100 Static Characteristics(RSD-150D-24) 32 28 350 300 250 200 150 100 50 80 No base plate 60 24 20 16 12 8 LOAD (%) 40 Have base plate 360 360 2mm 20 -40 0 10 20 30 40 50 55 60 70 (HORIZONTAL) 57.6 60 65 85 95 105 115 125 135 145 154 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) File Name:RSD-150-SPEC 2011-12-01 OUTPUT RIPPLE (mVp-p) OUTPUT VOLTAGE (V)