SBT01M-09

1W DC-DC Unregulated Single Output Converter Features : 1000VDC I/O isolation Internal SMD technology Protection: Short circuit Cooling by free air convection Non-conductive plastic case SMD package styles 100% full load burn-in test Low cost / High reliability Approved: UL / CUL 1 year warranty SBT01 series SPECIFICATION ORDER NO. DC OUTPUT VOLTAGE OUTPUT CURRENT RANGE EFFICIENCY RATED POWER OUTPUT SBT01L-05 5V 0 ~ 200mA 70% 1W 72% SBT01M-05 SBT01L-09 9V 0 ~ 111mA 74% 75% SBT01M-09 SBT01L-12 12V 0 ~ 84mA 74% 75% SBT01M-12 SBT01L-15 15V 0 ~ 67mA 75% 75% SBT01M-15 RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 1.2% for 1% input variation LOAD REGULATION Note.4 8.0% VOLTAGE TOLERANCE VOLTAGE RANGE NORMAL VOLTAGE 8.0% SWITCHING FREQUENCY(Typ.) 100KHz 4.5 ~ 5.5V 5V Full load 292mA No load 29mA Momentary Protection type : Broken Momentary Protection type : Broken -40 ~ +85 -40 ~ +105 (Refer to output load derating curve) , 10 ~ 95% RH 20% ~ 90% RH non-condensing 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2 I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH 10.8 ~ 13.2V 12V 120mA 15mA 4.5 ~ 5.5V 5V 292mA 29mA 10.8 ~ 13.2V 12V 120mA 15mA 4.5 ~ 5.5V 5V 292mA 29mA 10.8 ~ 13.2V 12V 120mA 15mA 4.5 ~ 5.5V 5V 292mA 29mA 10.8 ~ 13.2V 12V 120mA 15mA INPUT INPUT CURRENT PROTECTION OVERLOAD Fuse recommended PROTECTION SHORT CIRCUIT WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE MTBF OTHERS DIMENSION WEIGHT 500khrs min. MIL-HDBK-217F(25 ) 12.7*7.5*6.0mm or 0.50"*0.30"*0.24" inch (L*W*H) 1.3g Mechanical Specification 12.7 7.62 8 7 6 5 Unit: mm (inch) Pin Configuration Pin No. 1 2 3 4 5 6 7 8 Derating Curve Output -Vin +Vin NC -Vout +Vout NC NC NC 100 LOAD (%) 80 11.2 MAX 7.50 6.25 TOP VIEW 1 2 3 4 6.00 2.54 0.5 0.25 2.54 4.13 -40 0 25 50 70 85 100 Ta ( ) NOTE 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SBT01-SPEC 2008-05-08