SCW05B-05

5W DC-DC Regulated Single Output Converter Features : SCW05 series 2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation 3000VDC I/O isolation(option) Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Five-sided shield metal case 100% burn-in test Low cost / High reliability Approvals: FCC / CE 2 years warranty SPECIFICATION ORDER NO. DC VOLTAGE CURRENT RANGE RATED POWER OUTPUT SCW05A-05 SCW05B-05 SCW05C-05 SCW05A-09 SCW05B-09 SCW05C-09 SCW05A-12 SCW05B-12 SCW05C-12 SCW05A-15 SCW05B-15 SCW05C-15 5V 100 ~ 1000mA 9V 56 ~ 556mA 5W 60mVp-p 12V 47 ~ 470mA 5.6W 60mVp-p 15V 40 ~ 400mA 6W 60mVp-p 5W RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 0.5% LOAD REGULATION Note.4 0.5% 2.0% 50KHz min. A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 83% 80% 82% 83% 81% 83% 81% VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE RANGE EFFICIENCY (Typ.) INPUT DC CURRENT FILTER PROTECTION OVERLOAD PROTECTION (Note. 5) 75% 77% 77% 80% 81% Full load A: 617mA B: 301mA C: 147mA No load Pi network Fuse recommended A: 41mA B: 22mA C: 12mA SHORT CIRCUIT WORKING TEMP. WORKING HUMIDITY 150 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +71 (Refer to output load derating curve) ENVIRONMENT 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -25 ~ +105 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / (0 ~ 50 ) VIBRATION WITHSTAND VOLTAGE 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 80pF max. / 70% RH ISOLATION RESISTANCE SAFETY & ISOLATION CAPACITANCE EMC EMI CONDUCTION & RADIATION EMS IMMUNITY OTHERS MTBF DIMENSION WEIGHT Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A 900khrs min. MIL-HDBK-217F(25 ) 31.8*20.3*12.2mm or 1.25"*0.80"*0.48" inch (L*W*H) 15g Mechanical Specification Unit:mm(inch) 20.3(0.80) Pin Configuration Derating Curve 0.6+ 0.1/-0(0.024) 2 3.81(0.15) Pin No. 2&3 9 11 14 16 22 & 23 Output - Vi n N.C. N.C. + Vo u t - Vo u t + Vi n 100 LOAD (%) 23 22 17.8(0.70) 3 80 BOTTOM VIEW 16 14 9 11 2.54( 0.10 ) 5.08( 0.20 ) SIDE VIEW 15.24(0.60) 31.8(1.25) 12.2(0.48) -25 0 25 50 60 71 100 Ta ( NOTE 1.All parameters are specified at normal input, rated load, 25 70% RH Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. ) File Name:SCW05-SPEC 2008-05-08