200W Single Output DC-DC Converter
Features :
2:1 wide input range
SD-200
series
Protections: Short circuit / Overload / Over voltage / Over temperature 1500VDC I/O isolation Cooling by free air convection 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE INPUT EFFICIENCY (Typ.) DC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMI CONDUCTION & RADIATION EMS IMMUNITY MTBF OTHERS
NOTE
(for SD-200C-24 type only)
SD-200B 5V 34A 0 ~ 34A 170W 4.5 ~ 5.5VDC 2.0% 0.5% 1.0% B:19 ~ 36VDC 79% 12V 16.7A 0 ~ 16.7A 200.4W 120mVp-p 11 ~ 16VDC 1.0% 0.5% 1.0% 24V 8.4A 0 ~ 8.4A 201.6W 150mVp-p 23 ~ 30VDC 1.0% 0.5% 1.0% 48V 4.2A 0 ~ 4.2A 201.6W 200mVp-p 43 ~ 53VDC 1.0% 0.5% 1.0% D:72 ~144VDC 86% 10.4A/24V 81% 5.4A/48V 84% 5.2A/48V SD-200C 5V 40A 0 ~ 40A 200W 100mVp-p 4.5 ~ 5.5VDC 2.0% 0.5% 1.0% 12V 16.7A 0 ~ 16.7A 200.4W 120mVp-p 11 ~ 16VDC 1.0% 0.5% 1.0%
(for D type only)
24V 8.4A 0 ~ 8.4A 201.6W 150mVp-p 23 ~ 30VDC 1.0% 0.5% 1.0%
48V 4.2A 0 ~ 4.2A 201.6W 200mVp-p 43 ~ 53VDC 1.0% 0.5% 1.0%
RIPPLE & NOISE (max.) Note.2 100mVp-p
300ms, 50ms at full load C:36 ~ 72VDC 82% 85% 86% 6.7A/48V 86% 5A/48V
10.8A/24V 10.6A/24V 10.4A/24V C:45A/48VDC D:45A/96VDC
105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (100 5 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V
for SD-200B-12 only) TSW1 detect on main power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1approved (for SD-200C-24 type only), IEC60950-1 CB approved by TUV (for D type only) I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,6,8; ENV50204, light industry level, criteria A 218.2K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.92CUFT )
DIMENSION PACKING
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
File Name:SD-200-SPEC 2008-03-24
200W Single Output DC-DC Converter
Features :
2:1 wide input range
SD-200
series
Protections: Short circuit / Overload / Over voltage / Over temperature 1500VDC I/O isolation Cooling by free air convection 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE INPUT EFFICIENCY (Typ.) DC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC
(Note 4)
(for D type only)
SD-200D 5V 40A 0 ~ 40A 200W 4.5 ~ 5.5VDC 2.0% 0.5% 1.0% 300ms, 50ms at full load B:19 ~ 36VDC 82% 3.5A/96V C:45A/48VDC C:36 ~ 72VDC 82% 3.5A/96V D:45A/96VDC D:72 ~144VDC 84% 3.5A/96V 90% 3.5A/96V 12V 16.7A 0 ~ 16.7A 200.4W 120mVp-p 11 ~ 16VDC 1.0% 0.5% 1.0% 24V 8.4A 0 ~ 8.4A 201.6W 150mVp-p 23 ~ 30VDC 1.0% 0.5% 1.0% 48V 4.2A 0 ~ 4.2A 201.6W 200mVp-p 43 ~ 53VDC 1.0% 0.5% 1.0%
RIPPLE & NOISE (max.) Note.2 100mVp-p
105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover 5.75 ~ 6.75V 16.8 ~ 20V Protection type : Shut down o/p voltage, re-power on to recover 85 5 (TSW1) detect on main power transistor 31.5 ~ 37.5V 53 ~ 65V
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes IEC60950-1 CB approved by TUV (for D type only) I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,6,8; ENV50204, light industry level, criteria A 218.2K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.92CUFT )
EMS IMMUNITY MTBF OTHERS DIMENSION PACKING
NOTE
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
File Name:SD-200-SPEC 2008-03-24
200W Single Output DC-DC Converter
Mechanical Specification
117.5 32.5 27.5 150 177.5
SD-200
Case No. 912B
series
Unit:mm
LED +V ADJ. 9 8 7 6 5 4 3 2 1
9.5
4-M4 L=5mm
8.3
215 32.5 13 max. 150
10
32.5
5-M3 L=3mm
50.5
115
85
50
Terminal Pin No. Assignment :
Pin No. 1 2 3 Assignment DC INPUT V+ DC INPUT VFG Assignment Pin No. 4,5,6 DC OUTPUT V7,8,9 DC OUTPUT V+
25 50
C L
4-M4 L=6mm
Block Diagram
I/P EMI FILTER RECTIFIERS & FILTER FILTER POWER SWITCHING RECTIFIERS & FILTER
fosc : 100KHz
+V -V
FG O.V.P. O.L.P. O.T.P. PWM CONTROL DETECTION CIRCUIT
Derating Curve
Static Characteristics
Ta=25
100
others
100 90
80
80
60
LOAD (%)
LOAD (%)
40
SD-200B,C,D-5 SD-200B-12 SD-200B-24 SD-200B-48
70 60 50 40
20
-20
0
10
20
30
40
50
60
(HORIZONTAL)
B:19 C:36 D:72
24 48 96
36 72 144
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (V)
File Name:SD-200-SPEC 2008-03-24
