SE-200-48

200W Single Output Switching Power Supply Features : SE-200 series AC input range selectable by switch Protections: Short circuit / Overload / Over voltage/ Over temperature Cooling by free air convection Withstand 300vac surge input for 5 second Built-in constant current limiting circuit 100% full load burn-in test LED indicator for power on Fixed switching frequency at 90KHz Low cost,high reliability 2 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE SE-200-3.3 3.3V 40A 0 ~ 40A 132W SE-200-5 5V 40A 0 ~ 40A 200W 150mVp-p 4.5 ~ 5.6V 2.0% 0.5% 1.0% SE-200-7.5 7.5V 27A 0 ~ 27A 202.5W 150mVp-p 6 ~ 9V 2.0% 0.5% 1.0% SE-200-12 12V 17A 0 ~ 17A 204W 150mVp-p 10 ~ 13.5V 1.0% 0.5% 0.5% SE-200-15 15V 14A 0 ~ 14A 210W 150mVp-p 13.5 ~ 18V 1.0% 0.5% 0.5% SE-200-24 24V 8.8A 0 ~ 8.8A 211.2W 150mVp-p 20 ~ 26.4V 1.0% 0.5% 0.5% SE-200-27 27V 7.8A 0 ~ 7.8A 210.6W 200mVp-p 26 ~ 32V 1.0% 0.5% 0.5% SE-200-36 36V 5.9A 0 ~ 5.9A 212.4W 240mVp-p 32 ~ 40V 1.0% 0.5% 0.5% SE-200-48 48V 4.4A 0 ~ 4.4A 211.2W 240mVp-p 41 ~ 56V 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 150mVp-p 2.97 ~ 3.7V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE 0.5% 1.5% 20ms/230VAC 47 ~ 63Hz 75% 4.5A/115VAC 40A/115VAC 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load 254 ~ 370VDC 85% 85% 87% 88% 89% 89% 16ms/115VAC at full load 90 ~ 132VAC / 180 ~ 264VAC by switch 79% 82% 2.5A/230VAC 55A/230VAC