SP-100-48

100W Single Output with PFC Function Features : Universal AC input / full range SP-100 series Built-in active PFC function, PF>0.93 Protections: Short circuit / Overload / Over voltage Built-in constant current limiting circuit Remote ON-OFF control(Optional) LED indicator for power on 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty .. SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE FUNCTION SP-100-3.3 3.3V 20A 0 ~ 20A 66W SP-100-5 5V 20A 0 ~ 20A 100W 100mVp-p ± 2.0% ± 0.5% ± 1.0% SP-100-7.5 7.5V 13.5A 0 ~ 13.5A 101.25W 100mVp-p ± 2.0% ± 0.5% ± 1.0% SP-100-12 12V 8.5A 0 ~ 8.5A 102W 100mVp-p ± 2.0% ± 0.5% ± 0.5% SP-100-13.5 SP-100-15 13.5V 7.5A 0 ~ 7.5A 101.25W 100mVp-p ± 2.0% ± 0.5% ± 0.5% 15V 6.7A 0 ~ 6.7A 100.5W 100mVp-p ± 2.0% ± 0.5% ± 0.5% SP-100-24 24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p ± 1.0% ± 0.5% ± 0.5% SP-100-27 27V 3.8A 0 ~ 3.8A 102.6W 150mVp-p ± 1.0% ± 0.5% ± 0.5% SP-100-48 48V 2.1A 0 ~ 2.1A 100.8W 250mVp-p ± 1.0% ± 0.5% ± 0.5% RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE TOLERANCE Note.3 ± 2.0% ± 0.5% ± 1.0% 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V 600ms, 30ms at full load 20ms at full load 85 ~ 264VAC 47 ~ 63Hz PF>0.93/230VAC 70% 76% PF>0.98/115VAC at full load 78% 80% 80% 82% 84% 83% 82% 120 ~ 370VDC 1.7A/115VAC 0.8A/230VAC COLD START 30A/230VAC