SPB03E-15

3W DC-DC Regulated Single Output Converter Features : SPB03 series 2:1 wide input range 1000VDC I/O isolation Built-in remote ON/OFF control Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Single in line package 100% full load burn-in test Low cost / High reliability Modified models available: output 3.3V/9V 2 years warranty SPECIFICATION ORDER NO. DC VOLTAGE CURRENT RANGE RATED POWER OUTPUT SPB03E-05 SPB03A-05 SPB03B-05 SPB03C-05 SPB03E-12 SPB03A-12 SPB03B-12 SPB03C-12 SPB03E-15 SPB03A-15 SPB03B-15 SPB03C-15 5V 60 ~ 600mA 3W 12V 25 ~ 250mA 60mVp-p 15V 20 ~ 200mA 60mVp-p RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 0.5% LOAD REGULATION VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE RANGE EFFICIENCY (Typ.) Note.4 0.5% 2.0% 100KHz min. E: 4.5 ~ 9VDC 74% No load 73% E: 110mA A: 9 ~ 18VDC 77% B: 18 ~ 36VDC 78% 76% C: 36 ~ 72VDC 80% 80% 79% 75% 80% 80% 82% INPUT DC CURRENT FILTER PROTECTION OVERLOAD Full load E: 810mA Pi network Fuse recommended A: 340mA B: 165mA A: 40mA B: 20mA C: 85mA C: 10mA PROTECTION (Note. 5) 150 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed -40 ~ +85 (Refer to output load derating curve) SHORT CIRCUIT WORKING TEMP. WORKING HUMIDITY ENVIRONMENT 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -25 ~ +105 , 10 ~ 95% RH 0.05% / (0 ~ 50 ) TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE ISOLATION CAPACITANCE 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 80pF max. / 70% RH SAFETY EMI CONDUCTION & RADIATION Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A EMS IMMUNITY REMOTE CONTROL OTHERS MTBF DIMENSION WEIGHT Power ON : R.C. ~ +Vin < 1VDC or open ; Power OFF : R.C. ~ +Vin > 4VDC or short 600Khrs min. MIL-HDBK-217F(25 ) 21.8*9.2*11.1mm or 0.86"*0.36"*0.44" inch (L*W*H) 4.8g Mechanical Specification 21.8(0.86) 11.1(0.44) Pin Configuration Unit:mm(inch) Derating Curve FRONT VIEW 123 0.5 0.05(0.02) 5.08 (0.2) 5678 0.5 (0.02) Pin No. 1 2 3 5 6 7 8 Output - Vi n + Vi n R.C. N.C. + Vo u t - Vo u t N.C. 100 3.81 0.5(0.15) 2.54(0.1) LOAD (%) 17.78(0.7) 50 BOTTOM VIEW 3.2(0.13) 2.01(0.08) 9.2(0.36) -40 0 25 50 70 85 100 Ta ( NOTE 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. ) File Name:SPB03-SPEC 2008-09-26