U65S111-P2J

80W AC-DC Single Output Desktop Features : 3 pole AC inlet IEC320-C14 Class power (with earth pin) Full output 12~48V safety approval U65S series Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case Fix switching frequency and regulation Topology: PWM 3882 circuit With power ON/OFF switch(option) LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS U65S105-P2J SPU65-105 Note.2 12V TUV Rheinland Product Safety geprUfre Sicherheit U65S106-P2J SPU65-106 15V 5.33A 0 ~ 5.33A 80W 100mVp-p 3.0% 0.5% 2.5% 140 ~ 370VDC 76% U65S107-P2J SPU65-107 18V 4.44A 0 ~ 4.44A 80W 120mVp-p 3.0% 0.5% 2.0% U65S108-P2J SPU65-108 24V 3.33A 0 ~3.33A 80W 150mVp-p 2.0% 0.5% 1.5% U65S109-P2J SPU65-109 29V 2.75A 0 ~ 2.75A 80W 180mVp-p 2.0% 0.5% 1.5% U65S111-P2J SPU65-111 48V 1.66A 0 ~ 1.66A 80W 240mVp-p 2.0% 0.5% 1.0% 6.66A 0~ 6.66A 80W RIPPLE & NOISE (max.) Note.3 100mVp-p Fixed VOLTAGE TOLERANCE Note.4 4.0% Note.5 Note.6 0.5% 3.5% 95 ~ 264VAC 47 ~ 63Hz 75% 1.9A / 100VAC 40A / 230VAC 0.75mA / 240VAC SETUP, RISE, HOLD UP TIME 800ms, 50ms, 16ms at full load 77% 78% 80% 81% 110 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 ~ 140% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover 0 ~ + 40 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 3AXES 10min./1cycle, period for 60min. each along X, Y, Z axes UL1950, EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC , I/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P,I/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B EMC (Note. 7) HARMONIC CURRENT EMS IMMUNITY MTBF Compliance to EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 100K hrs min. MIL-HDBK-217F (25 ) 168*78.5*44.5mm (L*W*H) 0.75kg; 25pcs / 19kg / CARTON Standard type P2J: 2.1 * 5.5 * 11mm, center positive for stock ; Other type available by customer requested SPT-2 16AWG 6FT for 12V; SPT-1 18AWG 6FT for 15 ~ 48V; Other type available by customer requested OTHERS DIMENSION PACKING PLUG CABLE CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH Ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:U65S-SPEC 2008-05-08 80W AC-DC Single Output Desktop Mechanical Specification U65S series Unit:mm SPT-2 16AWG 1830 50mm for 12V SPT-1 18AWG 1830 50mm for 15 ~ 48V AC INPUT IEC 320 INLET 44.5 1.0 168.0 1.0 11 ID 2.1 x OD 5.5 4- R4 .5 POWER LED 22.25 Plug Assignment Standard plug: P2J (option) 39.25 78.5 1.0 78.5 1.0 3 R1 P2J P/N CENTER OUTPUT + NAME PLATE RUBBER FOOTX4 Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 0 10 20 25 30 40 80 60 60 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:U65S-SPEC 2008-05-08