225W Single Output with PFC Function
Features :
USP-225
series
Universal AC input / Full range Built in active PFC circuit compliance to EN61000-3-2 Protections: Short circuit / Overload / Over voltage / Over temperature Free air convection for 150W and forced air convection for 225W High power density 4.7w/in
3
Active AC surge current limiting U-bracket low profile:38mm 3 years warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) 115VAC 230VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & EMC
(Note 4)
USP-225-3.3 3.3V 40A 0 ~ 40A 132W 2.97 ~ 3.6V 2.0% 0.5% 1.0%
USP-225-5 5V 40A 0 ~ 40A 200W 100mVp-p 4.5 ~ 5.5V 2.0% 0.5% 1.0%
USP-225-12 12V 18.7A 0 ~ 18.7A 224.4W 100mVp-p 10.8 ~ 13.2V 2.0% 0.5% 1.0%
USP-225-15 15V 15A 0 ~ 15A 225W 100mVp-p 13.5 ~ 16.5V 2.0% 0.5% 1.0%
USP-225-24 24V 9.4A 0 ~ 9.4A 225.6W 150mVp-p 21.6 ~ 26.4V 2.0% 0.5% 1.0%
USP-225-48 48V 4.7A 0 ~ 4.7A 225.6W 250mVp-p 43.2 ~ 52.8V 2.0% 0.5% 1.0%
RIPPLE & NOISE (max.) Note.2 100mVp-p
500ms, 30ms/230VAC 22ms/230VAC 90 ~ 264VAC 47 ~ 63Hz PF>0.93/230VAC 72% 2.2A 1.1A 15A/115VAC 0.97/115VAC at full load 77% 3.3A 1.6A 30A/230VAC 83% 84% 85% 86%
105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.6 ~ 4.4V 5.5 ~ 7.4V 13.2 ~ 16.3V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (RTH2 : detect on heatsink of power transistor) -20 ~ +65 -40 ~ +85 (Refer to output load derating curve) , 10 ~ 95% RH 16.5 ~ 20.2V 26.4 ~ 32.4V 52.8 ~ 64.8V
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 20 ~ 90% RH non-condensing 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC / 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING Compliance to EN61000-3-2,-3
ISOLATION RESISTANCE
OTHERS
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A 220K hrs min. MIL-HDBK-217F (25 ) 202*101.5*38mm (L*W*H) 0.85Kg; 16pcs/14.6Kg/0.76CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
File Name:USP-225-SPEC 2010-10-18
225W Single Output with PFC Function
Mechanical Specification
202 198.25 65.75 60
USP-225
Case No. 928
series
Unit:mm
23.5CFM
3.75
FAN
15cm
Air flow direction
38
8
248.5
LED
3.2
101.5
93.5
CN2
10 9 8 7 6 5 4 3 2 1 11 12 13 14 15 16 17 18 19 20
2-M
1 2 3
CN1
3
FS1 F6.3A/250V
AC Input Connector (CN1) : JST B3P-VH or equivalent
Pin No. 1 2 3 Assignment AC/N No Pin AC/L Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent
DC Output Connector (CN2) : MOLEX 39-29-9206 or equivalent
Pin No. 1~5 6~15 16~20 Assignment +V -V +V Mating Housing MOLEX 5557 or equivalent Terminal MOLEX 5556 or equivalent
Block Diagram
EMI FILTER ACTIVE INRUSH CURRENT LIMITING RECTIFIERS & P.F.C. POWER SWITCHING RECTIFIERS & FILTER
fosc : 100KHz
+V -V O.T.P. O.C.P.
I/P
FG
O.L.P.
P WM CONTROL
DETECTION CIRCUIT O.V.P.
Derating Curve
3.3V,5V Model With 18CFM Forced Air Convection
Static Characteristics (5V)
Ta=25
With18CFM Forced Air Convection
100
100 90 80 70
80 65 60
Free Air Convection
LOAD (%)
50 40
3.3V,5V Model Free Air Convection
LOAD(%)
0 10 20 30 40 45 50 60 70 (HORIZONTAL)
60 50 40
20
-20
90
100
110
135
155
230
260
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (V) 60Hz
File Name:USP-225-SPEC 2010-10-18
很抱歉,暂时无法提供与“USP-225-48”相匹配的价格&库存,您可以联系我们找货
免费人工找货