USP-500_10

500W Single Output with PFC Function Features : USP-500 series Universal AC input / Full range Built in active PFC circuit compliance to EN61000-3-2 Protections: Short circuit / Overload / Over voltage / Over temperature Free air convection for 400W and 500W with 23.5CFM forced air High power density 6.2w/in3 AC input active surge current limiting U-bracket low profile:41mm Current sharing(1+1) for 24V and 48V models (Optional) Built-in remote ON-OFF control Built-in remote sense function Built in DC OK active signal 3 years warranty USP-500-5 DC VOLTAGE RATED CURRENT 5V 80A USP-500-12 12V 42A 0 ~ 33A 0 ~ 42A 396W 504W 100mVp-p 10.8 ~ 13.2V 2.0% 0.5% 1.0% 20ms/115VAC at full load 127 ~ 370VDC 0.98/115VAC at full load 90% 2.6A/230VAC 50A/230VAC 90% 89% 90% USP-500-15 15V 33.5A 0 ~ 27A 0 ~ 33.5A 405W 502.5W 100mVp-p 13.5 ~ 16.5V 2.0% 0.5% 1.0% USP-500-24 24V 21A 0 ~ 17A 0 ~ 21A 408W 504W 150mVp-p 21.6 ~ 27V 2.0% 0.5% 1.0% .. SPECIFICATION MODEL USP-500-48 48V 10.5A 0 ~ 8.5A 0 ~ 10.5A 408W 504W 150mVp-p 43.2 ~ 52.8V 2.0% 0.5% 1.0% CURRENT RANGE (convection) 0 ~ 60A CURRENT RANGE (23.5CFM FAN) 0 ~ 80A RATED POWER (convection) 300W RATED POWER (23.5CFM FAN) 400W OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE REMOTE ON/OFF CONTROL DC-OK SIGNAL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 4.5 ~ 5.5V 2.0% 0.5% 2.0% 1500ms, 80ms/230VAC 20ms/230VAC Note.5 90 ~ 264VAC 3100ms, 80ms/115VAC at full load 47 ~ 63Hz 0.95/230VAC 85% 6A/115VAC 30A/115VAC