WDR-120-24

120W Single Output Industrial DIN RAIL Power Supply Features : WDR-120 series Single and two phase wide input range 180 ~ 550VAC Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test Built-in DC OK relay contact 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION DC OK SIGNAL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) WDR-120-12 12V 10A 0 ~ 10A 120W WDR-120-24 24V 5A 0 ~ 5A 120W 120mVp-p 24 ~ 29V 1.0% 0.5% 0.5% 2000ms, 70ms, 10ms/230VAC at full load 254 ~ 780VDC 91% / 400V WDR-120-48 48V 2.5A 0 ~2.5A 120W 150mVp-p 48 ~ 58V 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 120mVp-p 12 ~ 15V VOLTAGE TOLERANCE Note.3 1.5% 0.5% 0.5% 180 ~ 550VAC 47 ~ 63Hz 89.5% / 400V 0.55A/400VAC 1.2A/230VAC COLD START 50A