HF24-B54-9

MEDER electronic HF Series High Frequency and High Power Reed Relays DESCRIPTION High voltage RF Reed Relays use a patented coil encapsulation, external electrostatic shields, and magnetic shields. For this series we use a special copper-plated Form A switch with a breakdown voltage up to 10 kVDC. The contacts are suitable for carrying current up to 3 Amps (5 Amps available) at 30MHz. FEATURES • Normally open contacts (Normally closed contacts are available) • 5 Amps available APPLICATIONS • Radio frequency technology • Antenna tuning units • Transmit / receive requirements DIMENSIONS All dimensions in mm [inches] ORDER INFORMATION Part Number Example HF05 - 1A54 - 6 05 is the nominal voltage 1A is the contact form 6 is the breakdown voltage (6 kVDC) Series HF Options Nominal Voltage XX 05, 12, 24 Contact Form XX A, B Switch Model 54 Pin Out X 5, 6, 7, 8, 9 www.meder.com Europe # ++49-(0)7733-94870, USA # 800-870-5385 297 HF Series High Frequency and High Power Reed Relays MEDER electronic COIL DATA Contact Form Switch Model Coil Voltage VDC Nom. 5 Max. 7.5 16 30 7.5 16 30 Min. 36 225 900 27 153 612 Coil Resistance Pull-in Voltage VDC Max. 44 275 1100 33 187 748 Max. 3.5 8.4 16.8 3.5 8.4 16.8 Drop-out Volage VDC Min. 0.75 1.8 3.6 0.75 1.8 3.6 Nominal Coil Power mW Typ. 625 575 575 835 850 850 All Data at 20 °C Ω Typ. 40 250 1000 30 170 680 1A 54 1B ** 12 24 5 12 24 * The pull-in / drop-out voltage and coil resistance will change at rate of 0.4% per °C. ** Re-closure of Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin five is positive. PIN OUT www.meder.com 298 Europe # ++49-(0)7733-94870, USA # 800-870-5385 MEDER electronic HF Series High Frequency and High Power Reed Relays RELAY DATA All Data at 20° C Contact Ratings Switching Power Switch Model --> Contact Form --> Conditions Any DC combination of V & A not to exceed their individual max.‘s 1 MHz to 30 MHz 1 MHz to 30 MHz 1 MHz to 30 MHz w/ 0.5 V & 10mA Measured w/ 0.5V & 50mA 1.5 ms after closure Across contacts Contact to coil Coil to shield Across contacts Contact to coil Coil to shield Measured w/ 100 % overdrive Measured w/ no coil suppression Across contacts Contact to coil Coil to shield Switch 54 Form A / B Min. Typ. Max. 25 Unit W Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operation Time incl. Bounce Release Time Capacitance Life Expectancies Switching 5 V - 10 mA 500 1.5 5.0 150 200 1010 1010 1010 * 10 0.5 V A A mΩ Ω kVDC 3.0 1.0 2.5 10 20 ms ms pF DC only &