HM12-1A83-03

Headquarter Europe MEDER electronic AG Friedrich-List Strasse 6 D-78234 Engen-Welschingen Headquarter USA MEDER electronic Inc. 766 Falmouth Rd Mashpee, MA 02649 Reed Relay: HM12-1A83-03 8412183003 Tel.: +49(0)7733-9487-0 Fax: +49(0)7733-9487-32 eMail: info@meder.com Internet: www.meder.com Phone: +1/ 508-539-0002 Fax: +1/ 508-539-4088 eMail: salesusa@meder.com Part Number: Dimensions (mm) Layout / Pitch 2,5 mm / Top View Marking MEDER-Label Type Layout ProductionCodeEN60062 /Factory Code Pins: ∅ 0,8 mm / L 3,2 ± 0,3 mm Coil/Relay Characteristics Coil Resistance Nominal Voltage Nominal Rated Power Thermal Resistance Operate Voltage Release Voltage Conditions at 20°C Min. 225 Typ. 250 12 576 24 Max. 275 Units Ω VDC mW K/W VDC VDC 9 2 Contact Data 83 (Form A/Dry) Contact Rating Switching Voltage Switching Current Carry Current Static Contact Resistance (initial) Insulation Resistance Breakdown Voltage Operate Time, including Bounce Release Time Capacitance Any combination of the switching voltage and current must not exceed the given rated power DC or Peak AC DC or Peak AC DC or Peak AC Measured with Nominal Voltage RH 45% Measured with Nominal Voltage Measured with no coil suppression 0,6 50 7500 3 5 150 1010 10.000 3,0 1,5 W V A A mΩ Ω VDC ms ms pF Environmental Data Insulation Resistance Coil to Contact Dielectric Strength Coil to Contact Shock Vibration Operating Temperature Storage Temperature Soldering Temperature Cleaning Material of Case Sealing Compound Material of Pins Remarks Customer / Customer part number RH 45% ½ sine wave, duration 11ms at 800 Hz 10°C/min max. allowable 10°C/min max. allowable 5 sec. at 1012 10 Ω kV DC 50 20 -20 70 -35 105 260 fully sealed Plastics / Polycarbonat Polyurethan Cu-alloy tinned High Voltage Reed Relay for PCB Mounting. ( 03 = PIN OUT Index ) Standard Part g g °C °C °C Modifications in the sense of technical progress are reserved [VRRp-02.doc] REVISION / Rev. No.: 00 Page 1 of 1 DESIGNED BY: REVISED BY: E.Bunke APPROVED BY: APPROVED BY: R.Rippl DATE : DATE : 2003-05-22