KSK-1A53-2050

KSK-1A53-... All dimensions in mm [inches] MEDER electronic CHARACTERISTICS • • • • • Glass length of 20.5 mm and diameter of 2.8 mm Normally open 1 Form A contact Carry current up to 2.5 A High breakdown voltage up to 2 kVDC Good RF switch DIMENSIONS All Data at 20 oC Contact Ratings Switching Power* Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance cross Contacts Breakdown Voltage Release Time incl. Bounce Release Time Capacitance Test Coil ** Standard AT range Switch Model → Contact Form → Conditions Any DC combination of V and A not to exceed their individual max.’s DC or peak AC DC or peak AC DC or peak AC at 0.5 V & 10 mA measured w/ 0.5 V & 50 mA, 1.5 ms after closure 100 Volts applied > 60 sec. 100 % overdrive measured with/ no coil suppression at 10 kHz across contact KSK-1A53-... Form A Min. Typ. Max. 10 220 1.0 2.5 150 200 1010 2 0.75 0.1 0.2 KMS-01 20 50 AT CONTACT DATA Units W V A A mΩ mΩ Ω kVDC ms ms pF Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sine wave for 11 ms 10 - 2000 Hz max. 10 C / minute allowance o 50 20 -20 -55 130 130 260 g g o C C C max. 10 oC / minute allowance 5 sec. dwell o o Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch. * For life expectancy see our test section on Page 116. ** See our test section on Page 116. ORDER INFORMATION Part Number Example - KSK - 1A53 - 2025 2025 is the AT range (Any AT can be ordered between 20 & 50 in a minimum range of 5 AT) Series KSK Options Contact Form 1A Switch Model 53 At Range (between) xxxx 20 -50 www.meder.com 98