MK5-1A66B-500W

MK05 Series Reed Sensors with Screw Fastening Slot MEDER electronic DESCRIPTION MK5 sensors are magnetically operated Reed proximity switches designed for screw mounting. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. APPLICATIONS • Position and limit switch Pneumatic or hydraulic actuator position indication and end travel limit switch • Door and window contacts Security system applications • Level sensor Use with magnetic floats for water level detection in coffee makers, washing machines or dishwashers FEATURES • • • • • • Form A, B, and C available High power switches available Other cables, connectors and colors available Various case sizes available Five operate sensitivities available A choice of cable terminations and lengths are available • High voltage versions upon request All dimensions in mm [inch] DIMENSIONS www.meder.com 222 MEDER electronic MK05 Series Reed Sensors with Screw Fastening Slot ORDER INFORMATION Part Number Example MK5 - 1A66 C - 500 W Series Contact form XX Switchmodel XX Magnetic Sensitivity XCable Length (mm) XXX Termination X 1A is the contact form 66 is the switch model C is the magnetic sensitivity 500 is the cable length (mm) W is the termination MK4 - 66 1 Form A Options B, C, D, E C, D, E 500* W 85 1 Form B 1 Form C 90 * Other cable length available. MAGNETIC SENSITIVITY Sensitivity Class B C D E Pull In AT Range 10 - 15 15 - 20 20 - 25 25 - 30 TERMINATION For wire and termination details please consult factory. Form C version requires 3 conductors. W The cable cut length includes: 5 mm of wire stripped and tinned www.meder.com 223 MK05 Series Reed Sensors with Screw Fastening Slot MEDER electronic CONTACT DATA All Data at 20° C Contact Ratings Switching Power Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operate Time incl. Bounce Release Time Capacitance Contact Operation ** Must Operate Condition Must Release Condition Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10°C/ minute max. allowable 10°C/ minute max. allowable 5 sec. -20 -35 50 20 85 85 260 g g o Switch Model → Contact Form → Conditions Any DC combination of V & A not to exceed their individual max.‘s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10mA Measured w/ 0.5 V & 50mA , 1.5 ms after closure 100 volts applied Voltage applied for 60 sec. min. Measured w/ 100 % overdrive Measured w/ no coil suppression at 10 kHz cross contact Switch 66 Form A Min. Typ. Max. Units 10 200 0.5 1.25 150 200 1010* 225 * W V A A mΩ mΩ Ω VDC 0.5 0.1 0.2 ms ms pF Steady state field Steady state field 10 4 60 54 AT AT C C C o o Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com 224 MEDER electronic MK05 Series Reed Sensors with Screw Fastening Slot CONTACT DATA All Data at 20° C Contact Ratings Switching Power Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operate Time incl. Bounce Release Time Capacitance Contact Operation ** Must Operate Condition Must Release Condition Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10°C/ minute max. allowable 10°C/ minute max. allowable 5 sec. -20 -35 50 20 85 85 260 g g o Switch Model → Contact Form → Conditions Any DC combination of V & A not to exceed their individual max.‘s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10mA Measured w/ 0.5 V & 50mA , 1.5 ms after closure 100 volts applied Voltage applied for 60 sec. min. Measured w/ 100 % overdrive Measured w/ no coil suppression at 10 kHz cross contact Switch 90 Form B / C Min. Typ. Max. Units 20 175 0.5 1.0 150 250 109 200 W V A A mΩ mΩ Ω VDC 0.7 1.5 1.0 ms ms pF Steady state field Steady state field 15 40 AT AT C C C o o Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com 225