MK05 Series
Reed Sensors with Screw Fastening Slot
MEDER electronic
DESCRIPTION
MK5 sensors are magnetically operated Reed proximity switches designed for screw mounting. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch.
APPLICATIONS
• Position and limit switch Pneumatic or hydraulic actuator position indication and end travel limit switch • Door and window contacts Security system applications • Level sensor Use with magnetic floats for water level detection in coffee makers, washing machines or dishwashers
FEATURES
• • • • • • Form A, B, and C available High power switches available Other cables, connectors and colors available Various case sizes available Five operate sensitivities available A choice of cable terminations and lengths are available • High voltage versions upon request
All dimensions in mm [inch]
DIMENSIONS
www.meder.com
222
MEDER electronic
MK05 Series
Reed Sensors with Screw Fastening Slot
ORDER INFORMATION
Part Number Example MK5 - 1A66 C - 500 W
Series Contact form XX Switchmodel XX Magnetic Sensitivity XCable Length (mm) XXX Termination X
1A is the contact form 66 is the switch model C is the magnetic sensitivity 500 is the cable length (mm) W is the termination
MK4 -
66 1 Form A
Options
B, C, D, E C, D, E 500* W
85 1 Form B 1 Form C 90
* Other cable length available.
MAGNETIC SENSITIVITY
Sensitivity Class B C D E Pull In AT Range 10 - 15 15 - 20 20 - 25 25 - 30
TERMINATION
For wire and termination details please consult factory. Form C version requires 3 conductors.
W
The cable cut length includes: 5 mm of wire stripped and tinned
www.meder.com
223
MK05 Series
Reed Sensors with Screw Fastening Slot
MEDER electronic
CONTACT DATA
All Data at 20° C Contact Ratings
Switching Power Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operate Time incl. Bounce Release Time Capacitance Contact Operation ** Must Operate Condition Must Release Condition Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10°C/ minute max. allowable 10°C/ minute max. allowable 5 sec. -20 -35 50 20 85 85 260 g g
o
Switch Model → Contact Form → Conditions
Any DC combination of V & A not to exceed their individual max.‘s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10mA Measured w/ 0.5 V & 50mA , 1.5 ms after closure 100 volts applied Voltage applied for 60 sec. min. Measured w/ 100 % overdrive Measured w/ no coil suppression at 10 kHz cross contact
Switch 66 Form A Min. Typ. Max. Units
10 200 0.5 1.25 150 200 1010*
225 *
W V A A mΩ mΩ Ω VDC
0.5 0.1 0.2
ms ms pF
Steady state field Steady state field
10 4
60 54
AT AT
C C C
o
o
Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required.
www.meder.com
224
MEDER electronic
MK05 Series
Reed Sensors with Screw Fastening Slot
CONTACT DATA
All Data at 20° C Contact Ratings
Switching Power Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operate Time incl. Bounce Release Time Capacitance Contact Operation ** Must Operate Condition Must Release Condition Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10°C/ minute max. allowable 10°C/ minute max. allowable 5 sec. -20 -35 50 20 85 85 260 g g
o
Switch Model → Contact Form → Conditions
Any DC combination of V & A not to exceed their individual max.‘s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10mA Measured w/ 0.5 V & 50mA , 1.5 ms after closure 100 volts applied Voltage applied for 60 sec. min. Measured w/ 100 % overdrive Measured w/ no coil suppression at 10 kHz cross contact
Switch 90 Form B / C Min. Typ. Max. Units
20 175 0.5 1.0 150 250 109
200
W V A A mΩ mΩ Ω VDC
0.7 1.5 1.0
ms ms pF
Steady state field Steady state field
15
40
AT AT
C C C
o
o
Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required.
www.meder.com
225
很抱歉,暂时无法提供与“MK5-1A66D-500W”相匹配的价格&库存,您可以联系我们找货
免费人工找货