SIL05-1B72-71D

Headquarter Europe MEDER electronic AG Friedrich-List Strasse 6 D-78234 Engen-Welschingen Headquarter USA MEDER electronic Inc. 766 Falmouth Rd Mashpee, MA 02649 Reed Relay: SIL05-1B72-71D 3305072171 Tel.: +49(0)7733-9487-0 Fax: +49(0)7733-9487-32 eMail: info@meder.com Internet: www.meder.com Phone: +1/ 508-539-0002 Fax: +1/ 508-539-4088 eMail: salesusa@meder.com Part Number: Dimensions (tolerance ± 0,1mm) Layout 71D/ Pitch 2,54 / Top View Marking Type -Layout Production -CodeEN60062 Coil/Relay Characteristics Coil Resistance Nominal Voltage Nominal Rated Power Thermal Resistance Operate Voltage Release Voltage Return Voltage Conditions at 20°C Min. 450 Typ. 500 5,0 50 110 Max. 550 Units W VDC mW K/W VDC VDC VDC 3,5 0,75 6,5 Contact Data x (Form x/Dry) Contact Rating Switching Voltage Switching Current Carry Current Static Contact Resistance (initial) Insulation Resistance Breakdown Voltage Operate Time, including Bounce Release Time Capacitance Any combination of the switching voltage and current must not exceed the given rated power DC or Peak AC DC or Peak AC DC or Peak AC Measured with Nominal Voltage RH 45% Measured with Nominal Voltage Measured with no coil suppression 0,3 15 200 1,0 1,25 150 1010 250 0,5 0,1 W V A A mW W VDC ms ms pF Environmental Data Insulation Resistance Coil to Contact Dielectric Strength Coil to Contact Shock Vibration Operating Temperature Storage Temperature Soldering Temperature Cleaning Material of Case Material of Pins RH 45% ½ sine wave, duration 11ms from 10 - 2000 Hz 10°C/min max. allowable 10°C/min max. allowable 5 sec. at 1011 1,5 150 10 70 95 260 fully sealed mineral-filled epoxy FeNi-alloy tinned W kV AC -20 -35 g g °C °C °C Modifications in the sense of technical progress are reserved [VRRp-02.doc] REVISION / Rev. No.: 00 Page 1 of 1 DESIGNED BY: REVISED BY: Klaus Mueller APPROVED BY: APPROVED BY: Rudi Rippl DATE : DATE : 2002-05-24