MLX92221LUA-BAA-101-BU

2-WIRE SENSOR WITH INTEGRATED CAPACITOR ASIL A - END-OF-LINE PROGRAMMABLE 2-WIRE HALL LATCH/SWITCH Melexis presents a new package option, featuring an integrated decoupling ­capacitor, for its existing 2-wire Hall effect switch and latch sensor ICs. MLX92242 This new package option enables PCB-less modules and assemblies while retaining the EMI/ESD performance necessary in harsh duty environments. The pin ordering for this option is optimized to allow wider clearance and direct connection via welding or soldering to a connector or an insert molded lead frame connector. This avoids any secondary operations typically consisting of bending of the leads. FEATURES & BENEFITS kk Smaller module design kk Lower BOM count kk Higher reliability from fewer components wand connections kk Elimination of secondary lead form and trim operations kk Wider clearance kk Optimized EMI/ESD design kk PCB-less applications kk Integrated decoupling capacitor kk AEC-Q100 qualified kk Industry standard SIP TO-92 “UA” package kk ISO26262-compliant FOR MORE INFORMATION: WWW.MELEXIS.COM/MLX92242 The hammerhead shark is able to detect electronic signals of no more than half a billionth of a volt. The process uses specialized electroreceptors to detect and locate the source of an external electric field in its environment. What better animal to reflect our sensing capacities? MLX92242 / MLX92241 / MLX92221 MAIN APPLICATIONS kk Seat position detection kk Seatbelt buckle switch kk Open close detection NEW SIP UA PACKAGE OPTION WITH WIDER PIN-OUT FOR NO PCB ASSEMBLIES STANDARD MLX92242/41/21 SIP UA PACKAGE AND PIN-OUT MLX92242 INTEGRATED DECOUPLING CAPACITOR BLOCK DIAGRAM VDD VOLTAGE REGULATOR WITH RESERVE POLARITY PROTECTION TEST TEMPERATURE COMPENSATION SWITCHED HALL PLATE UNDER VOLTAGE LOCKOUT BOP/BRP REFERENCE THERMAL PROTECTION OUTPUT CURRENT SINK + CDS AMPLIFIER - CONTROL TRIMMING REGISTER V1/29-11-17 GND The above information is “as is” and believed to be correct and accurate. Melexis disclaims any and all liability in connection with or arising out of the furnishing, application or use of the information or products; any and all liability, including without limitation, special, consequential or incidental damages; and any and all warranties, express, statutory, implied, or by description, including warranties of fitness for particular purpose, non-infringement and merchantability. Melexis reserves the right to change it at any time and without notice. Users should obtain the latest version of the information to verify it is current. Users must further determine the suitability of a product for its application, including the level of reliability required and determine whether it is fit for a particular purpose. Export control regulations may apply and export might require a prior authorization from competent authorities. Melexis’ products are intended for use in normal commercial applications. Unless otherwise agreed upon in writing, the products are not designed, authorized or warranted to be suitable in applications requiring extended temperature range and/or unusual environmental requirements. High reliability applications, such as medical life-support or life-sustaining equipment are specifically not recommended by Melexis. Melexis’ products are sold under the Melexis’ Terms of Sale, which can be found at https://www.melexis.com/en/legal/terms-and-conditions.