16AF8C

GLASS PASSIVATED RECTIFIER 16AF05C THRU 16AF10C FEATURES • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 16.0 Ampere ITO-220AB Glass passivated chip junction Low power loss, high efficiency Low leakage High current capacity, high surge capacity High temperature soldering guaranteed 200℃/10 second,0.16”(4.06mm)lead length from case MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Marked on package Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.064ounce, 1.81 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS 16AF05C 16AF1C Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 • • • Maximum Average Forward Rectified Current TA Tc=100℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 8.0A Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage per element TA = 125℃ Typical Junction Capacitance ( Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Junction Temperature Range Storage Temperature Range 16AF2C 200 140 200 16AF4C 400 280 400 16.0 175 1.1 10 300 55 16AF6C 600 420 600 16AF8C 16AF10C 800 1000 560 700 800 1000 UNIT Volts Volts Volts Amps Amps Volts µA pF ℃/W ℃ ℃ I(AV) IFSM VF IR CJ RθJC TJ TSTG 2.5 (-55 to +150) (-55 to +150) Notes: 1. Unit mounted on heatsink E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED RECTIFIER 16AF05C THRU 16AF10C VOLTAGE RANGE CURRENT 50 to 1000 Volts 16.0 Ampere RATING AND CHRACTERISTIC CURVES 16AF05C THRU 16AF10C FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, 20 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE 200 CURRENT, (A) 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 15 (A) 100 10 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 1 Cycle 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 0 0 25 50 75 AMBIENT TEMPERATURE, (° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, 100 INSTANTANEOUS REVERSE CURRENT, (μA) 100 TJ =125° C 10 (A) 1.0 10 TJ =25° C Pulse Width=300us 1% Duty Cycle 0.1 0.4 0.8 1.2 1.6 1.0 TJ =25° C INSTANTANEOUS FORWARD VOLTAGE,(V) 0.1 0 20 40 60 80 100 120 140 FIG.5-TYPICAL JUNCTION CAPACITANCE PERCENT OF RATED PEAK 100 REVERSE VOLTAGE,(%) JUNCTION CAPACITANCE,(pF) 10 TJ =25° C f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com