8AF05

GLASS PASSIVATED RECTIFIER 8AF05 THRU 8AF10 FEATURES • • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 8.0 Ampere ITO-220AC Glass passivated chip junction Low power loss, high efficiency Low leakage High current capacity, high surge capacity High temperature soldering guaranteed 200℃/10 second,0.16”(4.06mm)lead length from case Also available in isolated package under part number 8A05 MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Marked on package Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.064ounce, 1.81 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS 8AF05 8AF1 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 • • • Maximum Average Forward Rectified Current TA Tc=100℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 8.0A Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage per element T = 125℃ A 8AF2 200 140 200 8AF4 400 280 400 8.0 175 1.1 10 200 55 8AF6 600 420 600 8AF8 800 560 800 8AF10 1000 700 1000 UNIT Volts Volts Volts Amps Amps Volts µA pF ℃/W ℃ ℃ I(AV) IFSM VF IR CJ RθJC TJ TSTG Typical Junction Capacitance ( Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Temperature Range Storage Temperature Range 2.5 (-55 to +150) (-55 to +150) Notes: 1. Unit mounted on heatsink E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED RECTIFIER 8AF05 THRU 8AF10 VOLTAGE RANGE CURRENT 50 to 1000 Volts 8.0 Ampere RATING AND CHRACTERISTIC CURVES 8AF05 THRU 8AF10 FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, PEAK FORWARD SURGE FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 CURRENT, (A) 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 200 16 (A) 8 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 100 0 0 25 50 75 100 125 150 175 0 1 1 Cycle 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, (° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, 100 INSTANTANEOUS REVERSE CURRENT, (μA) 100 TJ =125° C 10 (A) 1.0 10 TJ =25° C Pulse Width=300us 1% Duty Cycle 0.1 0.4 0.8 1.2 1.6 1.0 TJ=25° C INSTANTANEOUS FORWARD VOLTAGE,(V) 0.1 0 20 40 60 80 100 120 140 FIG.5-TYPICAL JUNCTION CAPACITANCE PERCENT OF RATED PEAK 100 REVERSE VOLTAGE,(%) JUNCTION CAPACITANCE,(pF) 10 TJ =25° C f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com