ARL754

BUTTON AUTOMOTIVE RECTIFIER ARL750 THRU ARL756 FEATURES • • • • VOLTAGE RANGE CURRENT 50 to 600 Volts 6.0 Amperes AR-L 0.409(10.4)DIA 0.382(9.7)TYP 0.051(1.3)DIA 0.047(1.2)TYP Low Leakage Low forward voltage drop High current capability High forward surge current capacity 1.0(25.4) MIN MECHANICAL DATA • • • • • • • Technology: Cell with vacuum soldered Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated lead , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.083 ounces, 2.32 grams 0.252(6.4) 0.236(6.0) 1.0(25.4) MIN Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS ARL750 50 35 50 ARL751 100 70 100 ARL752 200 140 200 6.0 ARL754 400 280 400 ARL756 600 420 600 UNIT Volts Volts Volts Amps VRRM VRMS VDC IO Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Rating for fusing (t＜8.3ms) Maximum instantaneous Forward Voltage at 80A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range Polarity and voltage demotion color band IFSM I2t VF IR RθJC TJ,TSTG Red Yellow 250 Amps A2S Volts UA ℃/W ℃ Green Green 259 1.0 5.0 250 1.0 (-65 to +175) Silver Notes: 1. Enough heatsink must be considered in application. E-mail: sales@cnmic.com Web Site: www.cnmic.com BUTTON AUTOMOTIVE RECTIFIER ARL750 THRU ARL756 VOLTAGE RANGE CURRENT 50 to 600 Volts 6.0 Amperes RATINGS AND CHARACTERISTIC CURVES ARL750 THRU ARL756 F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE AVERAGE FORWARD CURRENT, (A) F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 6.0 PEAK FORWARD SURGE CURRENT,(A) 300 8.3ms Single Half Sine-Wave 250 200 (JEDEC Method) Tj=Tj max 5.0 4.0 3.0 2.0 1.0 0 0 25 50 75 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 100 1 Cycle 0 1 110 100 125 150 175 2 4 6 8 10 20 40 60 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) 30 INSTANTANEOUS FORWARD CURRENT, (A) 100 20 SQUARE WAVE 10 10 0 0 5 10 15 20 25 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 1.0 AVERAGE FORWARD CURRENT, (A) 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com