ES1C

SURFACE MOUNT SUPER FAST RECTIFIER ES1A THRU ES1J FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 600 Volts 1.0 Ampere DO-214AC(SMA) Plastic package has underwrites laboratory flammability Classification 94V-0 Glass passivated chip junction Built-in strain relief Super Fast switiching speed for high efficiency High temperature soldering guaranteed 250℃/10 seconds MECHANICAL DATA • • • • Case: Transfer molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. SYMBOLS ES1A ES1B Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 • • • Maximum Average Forward Rectified Current At TA=55℃(NOTE 1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at rated DC blocking voltage at T A = 25℃ TA = 125℃ ES1C 150 105 150 ES1D 200 140 200 1.0 30 ES1E 300 210 300 ES1G 400 280 400 ES1J 600 420 600 UNIT Volts Volts Volts Amps Amps I(AV) IFSM VF IR trr CJ RθJA RθJL TJ TSTG 10 0.95 1.25 5.0 100 35 1.7 Volts µA nS Maximuml Reverse Recovery Time Test conditions IF =0.5A, IR =1.0A, IRR =0.25A Typical Junction Capacitance ( Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Junction Temperature Storage Temperature Range 8 88 28 (-55 to +150) (-55 to +150) pF ℃/W ℃ ℃ Notes: 1. Thermal resistance from Junction to ambient and from junction to lead mounted on PCB. with 0.2×0.2″(5.0 × 5.0mm) copper pad areas. E-mail: sales@cnmic.com Web Site: www.cnmic.com SURFACE MOUNT SUPER FAST RECTIFIER ES1A THRU ES1J VOLTAGE RANGE CURRENT 50 to 600Volts 1.0 Ampere RATING AND CHRACTERISTIC CURVES ES1A THRU ES1J FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FO RWARD CURRENT, 1.2 F IG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE 1.0 30 CURRENT , (A) 8.3ms Single Half Sine-W ave (JEDEC M ethod) Tj = Tjmax 20 0.8 ( A) 0.6 0.4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375 ″(9.5mm) Lead Length 10 0.2 1 Cycle 0 0 25 50 55 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, (° C) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, 100 INSTANTANEOUS F ORWARD CURRENT, 10 10 1.0 TJ = 25° C Pulse Width=300us 1% Duty Cycle (μ A) (A) TJ =125 ° C 1.0 0.1 TJ =25℃ 0.1 0 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 1000 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) JUNCTION CAPACITANCE,(pF) ES1A-ES1D ES1F-ES1J F1G.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC Trr 50Ω 10Ω NONINDUCTIVE NONINDUCTIVE (-) 100 (+) 25 Vdc (approx.) (-) TJ =25 ° C f= 1MHz Vsig=50mVp-p D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1) +0.5A 0 -0.25A 1Ω NON INDUCTIVE -1.0A 1cm 10 0.1 1.0 10 100 REVERSE VOLTAGE,(V) NOTES : 1.Rise Time=7ns max. Input Impedance= 1 magohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms SET TIME BASE FOR 50/100ns/cm E-mail: sales@cnmic.com Web Site: www.cnmic.com