ES2B

SURFACE MOUNT SUPER FAST RECTIFIER ES2A THRU ES2J FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 600Volts 2.0 Ampere Plastic package has Underwrites Laboratory Flammability Classification 94V-0 Glass passivated chip junction Built-in strain relief Super Fast switching speed for high efficiency High temperature soldering guaranteed: 250℃/10 seconds DO-214AA(SMB) MECHANICAL DATA • • • • Case: JEDED DO-214AA transfer molded plastic Terminals: Solder plated, Solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce, 0.093 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. SYMBOLS ES2A ES2B Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 • • • Maximum Average Forward Rectified Current at TL =100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum lnstantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current at TA=25℃ rated DC Blocking voltage per TA=125℃ element Maximum Reverse Recovery Time Test conditions IF=0.5A, IR=1.0A, IRR=0.25A Typical Junstion Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) ES2C 150 105 150 ES2D 200 140 200 2.0 50 ES2E 300 210 300 ES2G 400 280 400 ES2J 600 420 600 UNIT Volts Volts Volts Amps Amps I(AV) IFSM VF IR trr CJ RθJA RθJL TJ TSTG 25 0.95 1.25 5.0 200 35 1.7 Volts µA nS 208 75 17 (-55 to +150) (-55 to +150) pF ℃/W ℃ ℃ Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Tempetature Rang Notes: 1. Thermal resistance from Junction to ambient and from junction to lead mounted on P.C.B. with 0.3”×0.3”(8.0mm × 8.0mm) copper pad areas. E-mail: sales@cnmic.com Web Site: www.cnmic.com SURFACE MOUNT SUPER FAST RECTIFIER ES2A THRU ES2J VOLTAGE RANGE CURRENT 50 to 600 Volts 2.0 Ampere RATING AND CHRACTERISTIC CURVES ES2A THRU ES2J FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE A VERAGE FORWARD CURRENT, 3.0 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE 60 CURRENT, (A) 2.0 50 40 30 8.3ms Single Half Sine-Wave (JEDEC Method) TJ = T jmax (A) 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 20 10 1 Cycle 0 0 25 50 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, (° C) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, 10 INSTANTANEOUS FORWARD CURRENT, 1.0 2E ES -2G 2A - 2D ES 2J 1.0 ES 0.1 (μA) (A) TJ =100° C 0.1 0.01 TJ =25℃ TJ=25° C Pulse Width=300us 1% Duty Cycle 0.001 0.4 0.01 0 0.6 0.8 1.0 1.2 1.4 1.6 1.8 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) JUNCTION CAPACITANCE,(pF) ES 2A-E S2D E S 2 E -E S 2J F1G.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC Trr 50Ω 10Ω NONINDUCTIVE NONINDUCTIVE (-) 10 (+) 25 Vdc (approx.) (-) TJ =25° C f=1MHz Vsig=50mVp-p D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1) +0.5A 0 -0.25A 1Ω NON INDUCTIVE -1.0A 1cm 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) NOTES : 1.Rise Time=7ns max. Input Impedance= 1 magohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms SET TIME BASE FOR 50/100ns/cm E-mail: sales@cnmic.com Web Site: www.cnmic.com