FARL2505

BUTTON AUTOMOTIVE RECTIFIER FARL2505 THRU FARL256 FARSL2505 THRU FARSL256 FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 600 Volts 25.0 Amperes AR-L 0.409(10.4)DIA 0.382(9.7)TYP 0.051(1.3)DIA 0.047(1.2)TYP 0.051(1.3)DIA 0.047(1.2)TYP ARS-L 0.346(8.8)DIA 0.327(8.2)TYP Low Leakage Low forward voltage drop High current capability High forward surge current capacity Fast switching for high efficiency 1.0(25.4) MIN 1.0(25.4) MIN MECHANICAL DATA • • • • • • • Technology: Cell with vacuum soldered Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated lead , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.083 ounces, 2.32 grams 0.252(6.4) 0.236(6.0) 0.252(6.4) 0.236(6.0) 1.0(25.4) MIN 1.0(25.4) MIN Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS FARL2505 FARSL2505 50 35 50 FARL251 FARSL251 100 70 100 FARL252 FARSL252 200 140 200 25.0 FARL254 FARSL254 400 280 400 FARL256 FARSL256 600 420 600 UNIT Volts Volts Volts Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Rating for fusing (t＜8.3ms) Maximum instantaneous Forward Voltage at 80A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Maximum Reverse Recovery Time Test conditions IF=0.5A , IR=1.0A , IRR=0.25A Typical Thermal Resistance Operating and Storage Temperature Range Polarity and voltage demotion color band VRRM VRMS VDC IO IFSM I2t VF IR trr RθJC TJ,TSTG Red Yellow 150 1.15 300 374 1.30 10 100 200 1.0 (-65 to +175) Silver Green Green Amps A2S Volts UA nS ℃/W ℃ Notes: 1. Enough heatsink must be considered in application. E-mail: sales@cnmic.com Web Site: www.cnmic.com BUTTON AUTOMOTIVE RECTIFIER FARL2505 THRU FARL256 FARSL2505 THRU FARSL256 VOLTAGE RANGE CURRENT 50 to 600 Volts 25.0 Amperes RATINGS AND CHARACTERISTIC CURVES F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE AVERAGE FORWARD CURRENT, (A) FARL2505 THRU FARL256 FARSL2505 THRU FARSL256 F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT,(A) 400 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tj max 300 25 20 Single Phase Half Wave 60Hz 10 Resistive or Inductive Load 0.375″(9.5mm) Lead Length 200 1 Cycle 0 1 2 4 6 8 10 20 40 60 100 0 0 25 50 75 110 100 125 150 175 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) R FA 5 50 L2 -25 4 60 100 FA RL 6 25 40 SQUARE WAVE 20 10 0 0 10 20 30 40 50 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 1.0 AVERAGE FORWARD CURRENT, (A) 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com