G2SB60

GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER G2SB20 THRU G2SB100 FEATURES • • • • • • • VOLTAGE RANGE CURRENT 200 to 1000 Volts 1.5 Amperes Plastic package has Underwriters Laboratory Flammability Glassification 94V-0 Glass passivated chip junction High case dielectric strength Typical IR less than 0.1 A High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed: 260℃/10 seconds, 0.375”(9.5mm) lead length 5lbs.(2.3kg) tension GBL 20.7× 45 O 20.7 - 20.9 10.4 - 10.7 17 - 18.2 4.8 - 5.3 0 .4 6 - 0 .5 6 1.5 - 2.03 3 .2 5 - 3 .5 6 1.9 - 2.5 2.03 - 2.41 + ~ ~ ~ 0.9 - 1.1 MECHANICAL DATA • • • • Case: molded plastic body over passivated junctions Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any Weight: 0.071 oz, 2.0g Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS G2SB20 Maximum Reverse Peak Repetitive Voltage VRRM 200 Maximum RMS Voltage VRMS 140 Maximum DC Blocking Voltage VDC 200 Maximum Average Forward T C=80℃ (Note 1) Rectified Output Current At TA=25℃ Peak Forward Surge Current single sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward drop Per leg At 0.75 Amperes TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Rating for Fusing (t＜8.3ms) Typical Thermal Resistance Per Leg Operating Junction Storage and Temperature Range G2SB60 600 420 600 2.0 1.5 80 1.00 0.80 - 1.08 G2SB80 800 560 800 G2B100 1000 700 1000 UNIT Volts Volts Volts Amps Amps Volts μA I(AV) IFSM VF IR I2 t RΘJA RΘJC TJ ,TSTG 5.0 300 27 40 12 -55 to +150 A2s ℃/W ℃ Notes: 1.Unit mounted on P.C.B. at 0.375” (9.5mm) lead length and 0.5×0.5” (12×12mm) copper pads E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER G2SB20 THRU G2SB100 VOLTAGE RANGE CURRENT 200 to 1000 Volts 1.5 Amperes RATINGS AND CHARACTERISTIC CURVES G2SB20 THRU G2SB100 FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT 2 100 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD OUTPUT, (IF(AV)) P EAK FORWARD SURGE, CURRE NT,(A) P.C.B. Mounting, T A 1.5 80 60 1 40 0.5 20 0 0 25 50 75 100 125 150 0 1 CYCLE 1 100 AMBIENT TEMPERATURE, ℃ NUMBER OF CYCLES AT 60 Hz FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE 100 100 FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A ) 10 10 TA =125℃ 1 1 0.1 0.1 TA =25 ℃ 0.01 0 20 40 60 80 100 0.01 0.6 1 1.4 1.8 2.2 2.6 3 3.4 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE 100 FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE (℃/W) 100 JUNCTION CAPACITANCE, (pF) 10 10 1 0.1 1 0.1 1 10 100 0.01 0.01 0.1 1 10 100 REVRESE VOLTAGE,(V) T, HEATING TIME (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com