GBJ1504

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBJ15005 THRU GBJ1510 FEATURES • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 15.0 Amperes MECHANICAL DATA • • • • • Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any (Note 3) Mounting Torque: 8 in – 1bs max. Weight: 0.26 ounce, 7.0 gram 3.8-4.2 17.0-18.0 2.5±0.2 2.0-2.4 2.7-3.1 0.9-1.1 9.8-10.2 7.3-7.7 7.3-7.7 0.6-0.8 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBJ SYMBOLS GBJ 15005 GBJ 1502 GBJ 1504 GBJ 1506 GBJ 1508 GBJ 1510 1501 Maximum Reverse Peak Repetitive Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current At T C=107℃(Note VRRM VRMS VDC I(AV) IFSM It RJA RJC TJ,TSTG VF IR 2 50 35 50 100 70 100 200 140 200 1) TA=25℃(Note 2) 400 280 400 15 3.5 200 240 22 1.5 (-55 to +150) 1.00 10 250 600 420 600 800 560 800 1000 700 100 10.8-11.2 Plastic package has Underwriters Laboratory Flammability Glassification 94V-0 High case dielectric strength of 2500 VRMS Ideal for printed circuit boards Glass passivated chip junctions High surge current capability High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length 5 lbs. (2.3Kg) tension GBJ 29.7-30.3 3.0×45 O 4.4-4.8 3.4-3.8 .1 3 .4 O 19.7-20.3 φ3 5.0 UNIT Volts Volts Volts Amps Amps A2s ℃/W ℃ Peak Forward Surge Current single sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum thermal resistance per leg (Note 2) (Note 1) Operating Junction and Storage Temperature Range Maximum Instantaneous Forward Drop Per Leg At 12.5A Maximum DC Reverse Current at TA=25℃ rated DC blocking voltage per Leg TA=125℃ Volts μA Notes: 1. Unit mounted on 300mm×300mm×1.6mm A1. Plate heatsink 2. Unit mounted on P.C.B. without heatsink 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum Heat transfer with #6 screw E-mail: sales@cnmic.com Web Site: www.cnmic.com SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBJ15005 THRU GBJ1510 VOLTAGE RANGE CURRENT 50 to 1000 Volts 15.0 Amperes RATINGS AND CHARACTERISTIC CURVES GBJ15005 THRU GBJ1510 FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT 20 240 210 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD OUTPUT CURRENT (A) 15 PEAK FORWARD SURGE, CURRENT,(A) Heat-Sink Mounting. Tc 180 150 120 90 60 30 0 1 10 100 10 5 P.C.B. Mounting 0 1.0 Cycle 0 25 50 75 100 125 150 TEMPERATURE, ℃ NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG TA=125℃ FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE 100 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 INSTANTANEOUS REVERSE CURRENT, (A) 10 1 1 0.1 0.1 TA=25℃ 0.01 0.01 0.6 0.8 1.0 1.2 1.4 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE 100 FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG 1000 100 TRANSIENT THERMAL IMPEDANCE (℃/W) 1 JUNCTION CAPACITANCE, (pF) 1 10 1 10 100 0.1 0.01 0.1 1 10 REVRESE VOLTAGE,(V) T, HEATING TIME (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com