0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
GBJ2004

GBJ2004

  • 厂商:

    MIC(昌福)

  • 封装:

  • 描述:

    GBJ2004 - SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER - MIC GROUP RECTIFIERS

  • 详情介绍
  • 数据手册
  • 价格&库存
GBJ2004 数据手册
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBJ20005 THRU GBJ2010 FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 20.0 Amperes GBJ O 19.7-20.3 Plastic package has UL Flammability Glassification 94V-0 Glass passivated chip junctions High case dielectric strength of 1500 VRMS High surge current capability High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length 29.7-30.3 3.0×45 O 4.4-4.8 3.4-3.8 - 3 .4 .1 φ3 5.0 • • • • • Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any (Note 3) Mounting Torque: 6 in – 1bs max. Weight: 0.26 ounce, 7.4 gram 3.8-4.2 17.0-18.0 MECHANICAL DATA 2.5±0.2 2.0-2.4 2.7-3.1 0.9-1.1 9.8-10.2 7.3-7.7 7.3-7.7 0.6-0.8 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBJ SYMBOLS GBJ 20005 GBJ 2002 GBJ 2004 GBJ 2006 GBJ 2008 GBJ 2010 2001 Maximum Reverse Peak Repetitive Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At TC=100℃ (Note 1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t<8.3ms) Maximum Instantaneous Forward Voltage drop Per bridge element 10.0A Maximum DC Reverse Current at rated DC blocking voltage per element Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range TA=25℃ TA=125℃ VRRM VRMS VDC I(AV) IFSM I2 t VF IR RJA TJ TSTG 50 35 50 100 70 100 200 140 200 400 280 400 20 3.5 240 239 1.0 10 500 22 (-55 to +150) (-55 to +150) 600 420 600 800 560 800 1000 700 100 10.8-11.2 UNIT Volts Volts Volts Amps Amps A2s Volts μA ℃/W ℃ ℃ Notes: 1. Unit case mounted on 300mm×300mm×1.6mm A1. Plate heatdink 2. Unit mounted on P.B.C. without heatsink 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat Transfer with #6 screws E-mail: sales@cnmic.com Web Site: www.cnmic.com SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBJ20005 THRU GBJ2010 VOLTAGE RANGE CURRENT 50 to 1000 Volts 20.0 Amperes RATINGS AND CHARACTERISTIC CURVES GB20005 THRU GBJ2010 FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT 20 400 350 300 200 150 100 50 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD OUTPUT CURRENT (A) 15 10 P.C.B. Mounting 5 PEAK FORWARD SURGE, CURRENT,(A) Heat-Sink Mounting. Tc 1.0 Cycle 0 0 25 50 75 100 125 150 0 1 10 100 TEMPERATURE, ℃ NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG 1000 FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE 100 INSTANTANEOUS FORWARD CURRENT, (A) T A=125℃ INSTANTANEOUS REVERSE CURRENT, (A) 10 100 1 10 0.1 1 T A=25℃ 0.1 0 0.01 0.6 0.8 1.0 1.2 1.4 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE 10 FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG 1000 100 TRANSIENT THERMAL IMPEDANCE (℃ /W) JUNCTION CAPACITANCE, (pF) 1 10 1 1 10 100 0.1 0.01 0.1 1 10 REVRESE VOLTAGE,(V) T, HEATING TIME (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com
GBJ2004
1. 物料型号: - 型号系列:GBJ20005至GBJ2010。

2. 器件简介: - 单相玻璃钝化桥式整流器,适用于50至1000伏特的电压范围,电流为20.0安培。

3. 引脚分配: - 引脚为镀锡可焊性引线,符合MIL-STD-750方法2026,引脚长度为0.375英寸(9.5毫米)。

4. 参数特性: - 塑料封装具有UL阻燃等级94V-0,玻璃钝化芯片连接,高机箱耐压1500VRMS,高浪涌电流能力,保证在260℃下10秒内可焊接,推荐使用#6螺丝固定在散热器上,以实现最大热传递。

5. 功能详解: - 最大反向峰值重复电压(VRRM)从50至1000伏特不等,最大RMS电压(VRMS)从35至700伏特不等,最大直流阻断电压(VDc)从50至1000伏特不等。 - 最大平均正向整流电流(I(AV))在100°C时为20安培,峰值正向浪涌电流(IFSM)为240安培,额定融断电流(I't)为239安培。 - 最大瞬态正向电压降(VF)为1.0伏特,最大直流反向电流(IR)在25°C时为10毫安,在125°C时为500微安。 - 典型热阻(RJA)为22°C/W,工作结温范围(T1)为-55至+150°C,存储温度范围(TSTG)也为-55至+150°C。

6. 应用信息: - 推荐在散热器上使用硅胶热化合物和#6螺丝固定,以实现最大热传递。

7. 封装信息: - 封装为模塑塑料体,引脚为可焊性镀锡引线。
GBJ2004 价格&库存

很抱歉,暂时无法提供与“GBJ2004”相匹配的价格&库存,您可以联系我们找货

免费人工找货