GBJ606

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBJ6005 THRU GBJ610 FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 6.0 Amperes GBJ O 19.7-20.3 Plastic package has UL Flammability Glassification 94V-0 Glass passivated chip junctions High case dielectric strength of 1500 VRMS High surge current capability High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length 29.7-30.3 3.0×45 O 4.4-4.8 3.4-3.8 -3 . 4 .1 φ3 5.0 • • • • • Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any (Note 3) Mounting Torque: 6 in – 1bs max. Weight: 0.26 ounce, 7.4 gram 3.8-4.2 17.0-18.0 MECHANICAL DATA 2.5±0.2 2.0-2.4 2.7-3.1 0.9-1.1 9.8-10.2 7.3-7.7 7.3-7.7 0.6-0.8 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBJ SYMBOLS GBJ 6005 601 GBJ 602 GBJ 604 GBJ 606 GBJ 608 GBJ 610 10.8-11.2 UNIT Volts Volts Volts Amps Amps A2s Volts μA Maximum Reverse Peak Repetitive Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At TC=110℃(Note 1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per leg at 3.0A Maximum DC Reverse Current at rated DC blocking voltage per element TA=25℃ TA=125℃ VRRM VRMS VDC I(AV) IFSM I2 t VF IR CJ RJA TJ TSTG 50 35 50 100 70 100 200 140 200 400 280 400 6.0 150 127 1.0 5.0 500 600 420 600 800 560 800 1000 700 100 Typical Junction Capacitance, per let (Note 4) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range 211.0 35.0 (-55 to +150) (-55 to +150) 94.0 pF ℃/W ℃/W ℃ Notes: 1. Unit mounted on AL Plate heatsink (100mm×100mm×1.6mm) 2. Unit mounted on P.C.B With 0.5”×0.5”×(12×12mm) copper pads on 0.375”(9.5mm) lead length 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum Heat transfer with #6 screws 4. Measured at 1.0 MHz and applied reverse voltage of 4.0 V E-mail: sales@cnmic.com Web Site: www.cnmic.com SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBJ6005 THRU GBJ610 VOLTAGE RANGE CURRENT 50 to 1000 Volts 6.0 Amperes RATINGS AND CHARACTERISTIC CURVES GBJ6005 THRU GBJ610 FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT,CURRENT (A) 6.0 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 150 100 PEAK FORWARD SURG E, CURRE NT,(A) Heat-Sink Mounting,Tc 2.6×1.4× 0.06"Thk ( 6.5×3.5× 0.15cm )AL.Plate Single Sine-Wave ( JEDEC Method) TJ = 150℃ 100 50 50 60Hz Resistive or Inductive Load 0 0 50 100 150 0 1 1.0 CYCLE 10 100 TEMPERATURE, ℃ FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE 100 500 100 NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 50-400V 600-1000V INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A ) 10 TJ =125℃ 10 1 TJ=25℃ Pulse width=300μ 1% Duty Cycle 1 0.1 0.1 T J =25℃ 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE,(V) FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG 1000 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE (℃/W) JUNCTION CAPACITANCE, (pF) Tj =25℃ f=1.0MHz Vsig=50mVp-p 10 100 1 10 0.1 50-400V 600-1000V 1 10 100 0.1 0.01 0.1 1 10 100 REVRESE VOLTAGE,(V ) T, HEATING TIME (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com