GBL01

SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBL005 THRU GBL10 FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 4.0 Amperes 20.7 - 20.9 20.7×45 O 0.9 - 1.1 MECHANICAL DATA 0.80 - 1 .08 0.46 - 0.56 4.8 - 5.3 • • Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBL GBL SYMBOLS 005 01 Maximum Reverse Peak Repetitive Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current, At T C=50℃(Note 1) TA=40℃(Note 2) GBL 02 200 140 200 I(AV) IFSM I2 t VF IR CJ RJA RJC TJ , TSTG 95.0 GBL 04 400 280 400 4.0 3.0 150 93.0 1.0 5.0 500 GBL 06 600 420 600 GBL 08 800 560 800 3.25 - 3.56 • • Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any Weight: 0.15 ounce, 4.0 gram GBL 10 1000 700 1000 17 - 18 .2 Plastic package has UL flammability Glassification 94V-0 Glass passivated chip junctions High case dielectric strength High surge current capability High temperature soldering guaranteed: 260℃/10 seconds, 0.375”(9.5mm) lead length 1.9 - 2.5 2.03 - 2.41 + ~ ~ ~ 10.4 - 10.7 1 .5 - 2 .03 UNIT Volts Volts Volts Amps Amps A2s Volts μA Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 4.0A TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Typical Junction Capacitance per leg (Note 3) Typical Thermal Resistance (Note 1) (Note 2) Operating Junction Temperature Range Storage Temperature Range 40.0 22.0 3.5 (-55 to +150) (-55 to +150) pF ℃/W ℃ ℃ Notes: 1. Unit mounted on 3.0×3.0×0.11” thick (7.5×7.5×0.3cm) A1. plate 2. Unit mounted on P.C.B. at 0.375” (9.5mm) lead lengh and 0.5×0.5”(12×12mm) copper pads 3. Measured at 1.0MHz and applied reverse voltage of 4.0 V E-mail: sales@cnmic.com Web Site: www.cnmic.com SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBL005 THRU GBL10 VOLTAGE RANGE CURRENT 50 to 1000 Volts 4.0 Ampere RATINGS AND CHARACTERISTIC CURVES 2KBP005G THRU 2KBP10G FIG. 1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 3.0 70 60 50 40 30 20 10 0 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER ELEMENT AVERAGE FORWARD OUTPUT, CURRENT,(A) PEA K FORWA RD SURGE, CURRENT,(A) 2.0 8.3ms Single Half Sine-Wave (JEDEC Method )Tj =T j max 1.0 Single Phase Half wave 60Hz Resistive or Inductive Load 0.375"(9.5MM) Lead Length 1 CYCLE 1 2 4 6 8 10 20 40 60 80 100 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ℃ FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS FORWARD CURRENT, (A) 20 10 10 NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 1.0 INSTANTANEOUS FREVERSE CURRENT, (μ A ) 1.0 Tj =100℃ 0.1 Tj =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 0.01 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 Tj =25℃ 0.01 JUNCTION CAPACITANCE,(pF) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( %) 10 Tj =25℃ f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVRESE VOLTAGE,(V ) E-mail: sales@cnmic.com Web Site: www.cnmic.com