GBLA10

SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBLA005 THRU GBLA10 FEATURES • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 4.0 Amperes 20.7 - 20.9 20.7×45 O Plastic package has Underwriters Laboratory Flammability Glassification 94V-0 Glass passivated chip junctions High case dielectric strength High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length,5 lbs. (2.3kg) tension 1.9 - 2.5 2.03 - 2.41 + ~ ~ ~ 0.9 - 1.1 4.8 - 5.3 0.80 - 1 .08 0.46 - 0.56 MECHANICAL DATA • • • • Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any Weight: 0.071 ounce,2.0 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBLA GBLA SYMBOLS 01 005 Maximum Reverse Peak Repetitive Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Output Current, At T C=50℃ TA=40℃ GBLA GBLA GBLA GBLA 3.25 - 3.56 GBLA 17 - 18 .2 10.4 - 10.7 1 .5 - 2 .03 02 200 140 200 I(AV) IFSM I2 t VF IR CJ RJA RJL TJ ,TSTG 95.0 04 400 280 400 4.0(Note 1) 3.0(Note 2) 120 60 1.0 5.0 500 06 600 420 600 08 800 560 800 10 1000 700 1000 UNIT Volts Volts Volts Amps Amps A2s Volts μA Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 4.0A TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Typical Junction Capacitance per leg (Note 3) Typical Thermal Resistance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range 40.0 22 10 (-55 to +150) pF ℃/W ℃/W ℃ Notes: 1. Unit mounted on 3.0×3.0×0.11” thick (7.5×7.5×0.3cm) AL. plate 2. Unit mounted on P.C.B. at 0.375” (9.5mm) lead lengh and 0.5×0.5”(12×12mm) copper pads 3. Measured at 1.0MHz and applied reverse voltage of 4.0 V E-mail: sales@cnmic.com Web Site: www.cnmic.com SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER GBLA005 THRU GBLA10 VOLTAGE RANGE CURRENT 50 to 1000 Volts 4.0 Ampere RATINGS AND CHARACTERISTIC CURVES GBLA005 THRU GBLA10 FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT AV ERAGE FORWARD O UTPUT,CURRENT (A) 5.0 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 150 60 Hz Resistive or Inductive Load Heat- SinkMounting 3.0× 3.0× 0.11"Thick (7.5×7.5×0.3cm ) Aluminum Plate 4.0 PEAK FORWARD SURGE, CURRENT, (A) TJ = T J max. Single Sine-Wave (JEDEC Method) 100 3.0 2.0 50 1.0 P.C.B. Mounting 0.47× 0.47"( 12×12mm) Copper pads with 0.375" (9.5mm) lead length 1.0 CYCLE 0 100 150 1 10 100 0 0 50 AMBIENT TEMPERATURE, ℃ NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 500 FIG. 3- TYPICAL FORWORD VOLTAGE CHARACTERISTICS P ER LGE 100 INSTANTA NEOUS FORWA RD CURRENT, (A) 10 INSTANTANEO US REV ERSE CURRENT, (A) 100 10 TA =125℃ 50-400V 600-1000V 1 1 0.1 TJ=25℃ s Pulse width=300 μ 1% Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 TA =25℃ 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, (V ) PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 100 FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG 1000 TRANSIENT THERMA L IMPEDANCE (℃/W) JUNCTION CAP ACITANCE, (pF) T j =25℃ f=1.0MHz Vsig=50mVp-p 10 100 1 10 0.1 50-400V 600-1000V 1 10 100 0.1 0.01 0.1 1 10 100 REVRESE VOLTAGE,(V) T, HEATING TIME (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com