GBPC101

GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER GBPC1005 THRU GBPC110 FEATURES • • • • • • • • Plastic package has underwriters laboratory Flammability classification 94V-0 Glass passivated ship junction High case dielectric with standing voltage of 1500VRMS Tyoical IR less than 0.1μA High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed 260℃/10 seconds, 0.375” (9.5mm) lead length at 5 lbs (2.3kg) tension MECHANICAL DATA • • • • Case: Epoxy, Molded Plastic body over passivated junctions Terminal: Plated leads solderable per MIL-STD-750 method 2026 Mounting position: Any (Note 1) Weight: 0.1 ounce, 2.8 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified SYMBOLS GBPC 1005 GBPC 101 GBPC 102 GBPC 104 GBPC 106 GBPC 108 GBPC 110 UNIT Volts Volts Volts Amps Amps Volts A2s µA ℃/W ℃ Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward output current at TC=60℃(Note2) TA=25℃(Note3) VRRM VRMS VDC I(AV) IFSM VF It IR RθJL RθJA TJ, TSTG 2 50 35 50 100 70 100 200 140 200 400 280 400 3.0 2.0 60 1.0 127 5.0 500 8.0 12 (-55 to +150) 600 420 600 800 560 800 1000 700 1000 Peak Forward Surge Current single half sine-wave superimposed on rated load (JEDEC method) TC=60℃ Maximum Instantaneous Forward Voltage Drop Per element at 1.5A Rating for Fusing (t＜8.3ms) Maximum Average Reverse Current at rated DC Blocking Voltage Typical Thermal Resistance per leg (NOTE 1) Operating and Storage Temperature Range T A = 25℃ TA = 125℃ Notes: 1. Bolt down on heatsink with silicon thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw. 2. Unit mounted 1.0” *4.0” *0.11” think(10.5*10.5*0.3cm)A1.Plate 3. Unit mounted on P.C.B. at 0.375”(9.5mm) lead with 0.5” *0.5”(12*12mm) copper pads E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER GBPC1005 THRU GBPC110 RATINGS AND CHARACTERISTICS CURVES GBPC1005 THRU GBPC110 PEAK FORWARD SURGE CURRENT(A) FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT, CURRENT(A) 5.0 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 60 50 40 30 20 10 4.0 3.0 2.0 Case Temperature, Tc Heatsink Mounting 4.0×4.0×0.11" Thk (10.5×10.5×0.3 cm) AL. Plate 60 Hz Resistive or Inductive Load TC=60℃ SINGLE SINE-WAVE 1.0 Ambient Temperature, P.C.B. Mounting 0.375" ( 9.5mm) Lead Length 0 50 TA 1.0 CYCLE 0 1 10 100 0 100 150 AMBIENT TEMPERATURE, ℃ FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG NUMBER OF CYCLES AT 60 Hz FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG INSTANTANEOUS REVE RSE CURRENT (μA) 50 20 INS TANTANE OUS FORWARD CURRENT (A ) 10 10 TJ =125℃ 1 TJ =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 1 0.1 0.1 TJ =25℃ 0.01 0 20 40 60 80 100 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG 100 PERCENT OF RATED PEAK REVERSEVOLTAGE, % FIG .6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG TRANSIENT THERMAL IMPE DANCE, (℃/W) 100 JUNCTION CAPACITANCE , pF TJ =25℃ f=1.0 MHz Vsig=50mVp-p 10 10 1 1 0.1 0.01 0.1 1.0 10 100 0.1 1 10 100 REVERSE VOLTAGE,(V) t, HEATING TIME, sec. E-mail: sales@cnmic.com Web Site: www.cnmic.com