GBPC5004

GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC50005 THRU GBPC5010 FEATURES • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 50.0 Amperes 1.135(28.8) 1.115(28.3) 0.72(17.1) .632(16.1) AC GBPC35 Plastic package has UL flammability classification 94V-0 Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation High forward surge capacity Glass passivated chip junction High isolation voltage from case to lugs High temperature soldering guaranteed: 260℃/10 seconds, + 1.135(28.8) 1.115(28.3) .672(17.1) .632(16.1) .582(14.8) .542(13.8) AC .732(18.6) .692(17.6) 0.094(2.4)DIA. 0.034(.86) .25(6.35) MECHANICAL DATA • • • • • 0.030(.76) Case:Epoxy, Molded Plastic with integrally mounted heatsink Terminals: Plated 0.25”(6.35mm) lug Polarity: Polarity symbols market on case Mounting: Thru hole for #10 screw, 20 in-lbs Torque max. See Note 3 Weight: 0.62 ounce, 17.5 gram .840(21.3) .310(7.87) .290(7.36) .740(18.8) .220(5.59) .100(5.08) HOLE FOR #10 SCREW METAL HEAT SINK Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS GBPC GBPC 50005 5001 GBPC 5002 GBPC 5004 GBPC 5006 GBPC 5008 GBPC 5010 UNIT Volts Volts Volts Amps Amps A2s Volts µA Volts ℃/W ℃ ℃ Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At TC=55℃ (SEE FIG.1) Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 25.0A T A = 25℃ Maximum DC Reverse Current at rated DC blocking Voltage per element T = 125℃ A Isolation Voltage from case to lug Typical Thermal Resistance (Note 1 and 2) Operating Junction Temperature Storage Temperature Range VRRM VRMS VDC I(AV) IFSM I2 t VF IR VISO RΘJC TJ TSTG 50 35 50 100 70 100 200 140 200 400 280 400 50 500 1037 1.1 5.0 1.0 2500 1.6 (-55 to +150) (-55 to +150) 600 420 600 800 560 800 1000 700 1000 Notes: 1.Unit mounted on 9”×3.5”×4.6”(23cm×9cm×11.8cm) AL Plate. 2.Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency with#10 screw E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC50005 THRU GBPC5010 VOLTAGE RANGE CURRENT 50 to 1000 Volts 50.0 Amperes RATINGS AND CHARACTERISTICS CURVES GBPC50005 THRU GBPC5010 FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 50 700 45 40 35 30 25 20 15 10 5 0 0 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 600 500 400 300 200 100 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT,(A) Heat Sink Mounting 9" × 3.5" × 4.6" Thick (23×9×11.8cm) AL. Finned Plate 8.3ms Single Half-Wave (JEDEC Method) T j =Tj max Single Phase Half wave 60Hz lnductive of Resistive Load 25 50 75 100 125 150 175 1 CYCLE 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE (℃) FIG. 3- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE LEMENT 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE LEMENT 100 INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (μ A) TJ =100℃ 10 10 1.0 1.0 TJ =25℃ PULSE WIDTH=300 μs 1% DUTY CYCLE TJ =25℃ 0.1 0.1 0.01 0.4 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5- MAXIMUM POWER DISSIPATION PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 100 AVERAGE POWER DIS SIPATION OF BRIDGE (W) 80 60 Tj =Tj max Capacitive Load 40 20 Resistive or Inductive Load 0 0 5 10 15 20 25 30 35 40 45 50 AVERAGE OUTPUT CURRENT, (A) E-mail: sales@cnmic.com Web Site: www.cnmic.com