GBU6J

GLASS PSSIVATED SINGLE-PHASE BRIDGE RECTIFIER GBU6A THRU GBU6M FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 6.0 Amperes GBU 21.8 - 22.3 3.2×45 7 .4 - 7 .9 R0.5 3.5 - 4.1 O Plastic package has Underwriters Laboratory Flammability Glassification 94V-0 Ideal for printed circuit boards Glass passivated chip junctions High surge current capability High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length at 5 lbs. (2.3kg) tension 3.3 - 3.56 1.52 - 2.03 2.16 - 2.54 17.5 - 18.0 18.3 - 18.8 1.9 - 2.16 2.0 - 2.2 MECHANICAL DATA • • • • • Case: molded plastic body over passivated junctions Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any (Note 2) Mounting Torque: 5 in-1b. Max. Weight: 0.15 ounce,4.0 gram 1.02 - 1.27 4.83 - 5.35 0.46 - 0.68 Dimensions in inches and (millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBU GBU SYMBOLS 6A 6B Maximum Reverse Peak Repetitive Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward T C=100℃(Note 1,2) I Rectified Output Current, At Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per leg at 4.0A TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Typical Junction Capacitance (Note 4) Typical Thermal Resistance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range (AV) GBU 6D 200 140 200 GBU 6G 400 280 400 6.0 150 127 1.0 5.0 500 GBU 6J 600 420 600 GBU 6K 800 560 800 GBU 6M 1000 700 100 UNIT Volts Volts Volts Amps Amps A2s Volts Amps mAmps IFSM I2 t VF IR CJ RJA RJL TJ ,TSTG 211 94 21 2.2 (-55 to +150) pF ℃/W ℃/W ℃ Notes: 1. Unit mounted on 2.6×1.4×0.06” thick (6.5×3.5×0.15cm) AL. plate heatsink 2. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum Heat transfer with #6 screw 3. Measured at 1.0 MHz and applied reverse voltage of 4.0 V E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PSSIVATED SINGLE-PHASE BRIDGE RECTIFIER GBU6A THRU GBU6M VOLTAGE RANGE CURRENT 50 to 1000 Volts 6.0 Ampere RATINGS AND CHARACTERISTIC CURVES GBU6A THRU GBU6M FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT AV ERA GE FORWA RD OUTPUT,CURRENT (A ) 6.0 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 150 100 PEAK FORWARD SURGE, CURRENT,(A) Heat-Sink Mounting,Tc 2.6×1.4×0.06"Thk (6.5×3.5×0.15cm )AL.Plate Single Sine-Wave (JEDEC Method) TJ = 150℃ 100 50 50 60Hz Resistive or Inductive Load 0 0 50 100 150 0 1 1.0 CYCLE 10 100 TEMPERATURE, ℃ NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 500 100 FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE 100 INS TANTANEOUS FORWARD CURRENT, (A) 50-400V 600-1000V T J =125℃ 10 INSTANTANEOUS RE VERS E CURRENT, (A) 10 1 TJ=25 ℃ Pulse width=300 μ S 1% Duty Cycle 1 0.1 0.1 T J =25℃ 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, ( V) PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE 100 FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG 1000 TRANS IE NT THERMAL IMPEDANCE (℃/W) JUNCTION CAPA CITANCE, (pF) T j =25℃ f=1.0MHz Vsig=50mVp-p 10 100 1 10 0.1 50-400V 600-1000V 1 10 100 0.1 0.01 0.1 1 10 100 REVRESE VOLTAGE, (V) T, HEATING TIME (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com