JAR806

JUMBO BUTTON AUTOMOTIVE RECTIFIER JAR8005 THRU JAR806 FEATURES • • • • VOLTAGE RANGE CURRENT 50 to 600 Volts 80.0 Amperes JAR .406(10.3)DIA .394(10.0)TYP .275(7.0) .169(6.7) Low Leakage Low forward voltage drop High current capability High forward surge current capacity .245(6.2) .230(5.9) .185(4.7) .169(4.3) MECHANICAL DATA • • • • • • .228(5.8) .220(5.6) Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated slug , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.085 ounces, 2.40 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS JAR8005 50 35 50 JAR801 100 70 100 JAR802 200 140 200 80.0 JAR804 400 280 400 JAR806 600 420 600 UNIT Volts Volts Volts Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range Polarity and voltage demotion color band VRRM VRMS VDC IO IFSM VF IR RθJC TJ,TSTG Red Yellow 700 1.02 5.0 500 0.8 (-65 to +175) Silver Orange Green Amps Volts UA ℃/W ℃ Notes: 1. Enough heatsink must be considered in application. E-mail: sales@cnmic.com Web Site: www.cnmic.com JUMBO BUTTON AUTOMOTIVE RECTIFIER JAR8005 THRU JAR806 VOLTAGE RANGE CURRENT 50 to 600 Volts 80.0 Amperes RATINGS AND CHARACTERISTIC CURVES JAR8005 THRU JAR806 F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE 80 F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 800 AVERAGE FORWARD CURRENT, (A) 70 60 50 PEAK FORWARD SURGE CURRENT,(A) 700 8.3ms Single Half Sine-Wave 600 500 400 300 200 100 1 2 4 6 8 10 20 40 60 100 (JEDEC Method) Tj=Tj max 40 30 20 10 0 0 25 50 75 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″ (9.5mm) Lead Length 1 Cycle NUMBER OF CYCLES AT 60 Hz 110 100 125 150 175 CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) 60 INSTANTANEOUS FORWARD CURRENT, (A) 100 40 SQUARE WAVE 20 10 0 0 10 30 50 70 90 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 1.0 AVERAGE FORWARD CURRENT, (A) 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com