LPB354

PRESS FIT AUTOMOTIVE RECTIFIER（BOSCH） LPB351 THRU LPB356 LPBS351 THRU LPBS356 TECHNICAL SPECIFICATION： FEATURES • • • • VOLTAGE RANGE CURRENT 100 to 600 Volts 35.0 Amperes LPB LPBS Low Leakage Low forward voltage drop High current capability High forward surge current capacity stannum stannum 8 .3 5 ± 0 .5 MECHANICAL DATA • • • • • • • Technology: Cell with Vacuum soldered Case: Copper case Polarity: As marked of case bottom Lead: Plated lead , solderable per MIL-STD-202E method 208C Mounting: Press Fit Weight: 0.17 ounces, 4.84 grams (LPB) Weight: 0.14 ounces, 3.96 grams (LPBS) 4.05± 0.2 Φ 10.77-10.83 Φ 5 . 5 -5 . 7 Φ10.18-10.23 Φ 5 . 5 -5 . 7 Φ 9 . 7 -1 0 . 4 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS LPB351 LPBS351 100 70 100 LPB352 LPBS352 200 140 200 35 LPB354 LPBS354 400 280 400 LPB356 LPBS356 600 420 600 UNIT Volts Volts Volts Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=105℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Rating for fusing (t＜8.3ms) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage Typical Thermal Resistance Operating and Storage Temperature Range Polarity and voltage demotion color band (button) TA=100℃ VRRM VRMS VDC I(AV) IFSM I2t VF IR RθJC TJ,TSTG Yellow Silver 500 1038 1.08 5.0 250 1.0 (-65 to +175) Orange Green Φ 8 . 2 -8 . 8 3 .4 0 ± 0 .2 10.30± 0.2 9.00± 0.2 7 .6 5 ± 0 .5 34.75± 0.5 Φ1.28±0.5 3 5 .4 5 ± 0 .5 Φ1.28±0.5 Amps A2S Volts UA ℃/W ℃ Notes: 1. Enough heatsink must be considered in application. E-mail: sales@cnmic.com Web Site: www.cnmic.com PRESS FIT AUTOMOTIVE RECTIFIER（BOSCH） LPB351 THRU LPB356 LPBS351 THRU LPBS356 VOLTAGE RANGE CURRENT 100 to 600 Volts 35.0 Amperes RATINGS AND CHARACTERISTIC CURVES F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE 35 LPB351 THRU LPB356 LPBS351 THRU LPBS356 F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT,(A) 30 600 8.3ms Single Half Sine-Wave 500 400 300 200 100 1 Cycle 1 2 4 6 8 10 20 40 60 80 100 (JEDEC Method) Tj=Tj max 20 10 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 0 0 25 50 75 100 125 150 175 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) 60 INSTANTANEOUS FORWARD CURRENT, (A) 40 SQUARE WAVE 100 20 10 0 0 10 20 30 40 50 T1=25℃ PULSE WIDTH=300μ S 1%DUTY CYCLE 1.0 AVERAGE FORWARD CURRENT, (A) 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com