MT3516G

GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER MT3508G THRU MT3516G FEATURES • • • • VOLTAGE RANGE CURRENT 1600 Volts 35 Amperes MT-35 1.137(28.9) 1.118(28.4) + Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation Glass passivated chip junction Surge overload rating to 400 ampers High temperature soldering guaranteed: 260℃/10 seconds,/5 lbs tension 1.137(28.9) 1.118(28.4) 0.208 (5.3) 0.196 (5.0) 0.65(16.5) 0.61(15.5) - 0.980(24.9) 0.94(23.9) MECHANICAL DATA • • .322 (8.2) .307 (7.8) • • Case:Epoxy, Molded Plastic with heaksink integrally Mounted in the bridge encapsulation. Mounting Position: Bolt down on heatsink with silicone Thermal compound between bridge and mounting Surface for maximum heat transfer efficiency Mounting Torque: 20 in,lbs max Weight: 0.706 ounce, 20 gram 0.933(23.7) 0.787(20.0) 0.033 (0.84) .25 (6.4) .25 (6.3) 0.028 (0.71) φ0.07(1.85) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% MT3508G SYMBOLS Peak Repetitive Reverse Voltage VRRM 800 Working Peak Reverse Voltage VRMS 800 Maximum DC Blocking Voltage VDC 800 Maximum Average Forward Rectified Output Current, at TC=55℃ (Note 2) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 17.5A Maximum DC Reverse Current at rated DC blocking voltage per element TA=25℃ Typical Thermal Resistance per Element Isolation Voltage from case to lug Operating and Storage Temperature Range MT3512G MT3516G 1200 1200 1200 35 400 1030 1.2 5.0 2.0 2500 (-55 to +150) 1600 1600 1600 UNIT Volts Volts Volts Amps Amps A2s Volts µAmps ℃/W I(AV) IFSM I2 t VF IR RΘJC VISO TJ ,TSTG VAC ℃ Notes: 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 2.Unit mounted on 11.8”×11.8”×0.6” thick(300×300×15mm) Copper plate. E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER MT3508G THRU MT3516G VOLTAGE RANGE CURRENT 1600 Volts 35 Amperes FIG. 1- TYPICAL FORWARD CURRENT DERATING CURVE 35 35 FIG. 2- TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 30 Mounted on A 11.8"× 11.8"×0.06" Thick (30×30× 0.15cm) Copper Plate 20 30 25 20 Mounted on A 12" ×12"×0.25" Thick (30.3× 30.3×0.635cm) Al Plate 15 10 5 0 0 25 50 75 100 125 150 175 10 60Hz Inductive or Resistive Load 60Hz Inductive or Resistive Load 0 0 25 50 55 75 100 125 150 175 CASE TEMPERATURE (℃ ) AMBIENT TEMPERATURE, (℃ ) FIG. 3- TYPICAL INSTANTANEOUS FORWARS CHARACTERISTICS 1000 100 80 60 40 FIG. 3- MAXIMUM POWER DISSIPATION INSTANTANEOUS FORWARD CURRENT, (A) 100 AVERAGE POWER DISSIPATION OF BRIDGE (W) 20 10 8.0 6.0 4.0 10 1.0 2.0 60Hz Inductive or Resistive Load T j =25 ℃ PULSE WIDTH=300 μs 1% DUTY CYCLE 0.1 0.4 1.0 0 5 10 15 20 25 30 35 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 AVERAGE OUTPUT CURRENT, (A) INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com