MZ1.0GD10V-25

ZENER DIODE MZ1.0GD3V3 THRUMZ1.0GD100 FEATURES • • • • Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with High power rating Standard Zener Voltage tolerance is ±5%, Add suffix “A” FOR ±10% tolerance Other Zener voltages and Tolerances are available upon request These diodes are also available in the MELF case with type Designation MZ1.0GM3V3 thru MZ1.0GM100 MECHANICAL DATA • • Case: DO-41 Glass Case Weight: approx.0.35g MAXIMUN RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Symbols Zener Current (see Table “characteristics”) Power Dissipation at Tamb=℃ Junction Temperature Storage Temperature Range Ptot Tj Ts 1.0(1) 150 -50to+150 Watts ℃ ℃ Limits Unit Characteristics at Tamb=25℃ Symbols Thermal Resistance Junction to Ambient Air Forward Voltage at IF=100mA RthJA VF Min - Typ - Max 170(1) 1.2 Unit ℃/W Volts Notes 1. Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature. E-mail: sales@cnmic.com Web Site: www.cnmic.com ZENER DIODE MZ1.0GD3V3 THRUMZ1.0GD100 ELECTRICAL CHARACTERISTIC Ratings at 25℃ ambient temperature unless otherwise specified Device Marking Code Zener Valtage(3) at IZT Vz(v) (△ Vz＜＝5%)(4) MIN MZ1.0GD3V-76 MZ1.0GD3V-69 MZ1.0GD3V-64 MZ1.0GD4V-58 MZ1.0GD4V-57 MZ1.0GD5V—49 MZ1.0GD5V-45 MZ1.0GD6V-41 MZ1.0GD6V-37 MZ1.0GD7V-34 MZ1.0GD8V-31 MZ1.0GD9V-28 MZ1.0GD10V-25 MZ1.0GD11V-23 MZ1.0GD12V-21 MZ1.0GD13V-19 MZ1.0GD15V-17 MZ1.0GD16V-15.5 MZ1.0GD18V-14 MZ1.0GD20V-12.5 MZ1.0GD22V-11.5 MZ1.0GD24V-106 MZ1.0GD27V-9.5 MZ1.0GD30V-8.5 MZ1.0GD33V-7.5 MZ1.0GD36V-7.0 MZ1.0GD39V-6.5 MZ1.0GD43V-6.0 MZ1.0GD47V-5.5 MZ1.0GD51V-5.0 MZ1.0GD56V-4.5 MZ1.0GD62V-4.0 MZ1.0GD68V-3.7 MZ1.0GD75V-3.3 MZ1.0GD82V-3.0 MZ1.0GD91V-2.8 MZ1.0GD100V-2.5 Notes: (1). The Zener impedance is derived from the 1KHz AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current (IZT or IZK) is superimposed on IZT or IZK . Zener impedances is measured at two point to insure a sharp knee on the breakdown Type Test Current IZT (mA) 76.0 69.0 64.0 58.0 53.0 49.0 45.0 41.0 37.0 34.0 31.0 28.0 25.0 23.0 21.0 19.0 17.0 15.5 14.0 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.8 2.5 Maximum Zener Impedance(1) ZZT At IZT (Ω) 10 10 9 9 8 7 5 2 3.5 4 4.5 5 7 8 9 10 14 16 20 22 23 25 35 40 45 50 60 70 80 95 110 125 150 175 200 250 350 ZZK (Ω) 400 400 400 400 500 550 600 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 3000 at IZK (mA) Maximum Reverse Leakage Current at VR IR (μA) (V) Surge Current at TA=25℃ IR(mA) Maximum Regulator Current(2) IZM(mA) 276 252 234 217 193 178 162 146 133 121 110 100 91 83 76 69 61 57 50 45 41 38 34 30 27 25 23 22 19 18 16 14 13 12 11 10 9 MAX 3.47 3.78 4.1 4.52 4.94 5.36 5.88 6.51 7.14 7.88 8.61 9.56 10.5 11.5 12.6 13.65 15.75 16.8 18.9 21 23.1 25.2 28.35 31.5 34.65 37.6 40.95 45.15 49.35 53.55 58.8 65.1 71.4 78.75 86.1 85.55 105 3V3-76 3V6-69 3V9-64 4V3-58 4V7-57 5V1-49 5V6-45 6V2-41 6V8-37 7V5-34 8V2-31 9V1-28 10V-25 11V-23 12V-21 13V-19 15V-17 16V-15.5 18V-14 20V-12.5 22V-11.5 10.624V279.5V30V8.533V-7.5 36V-7.0 39V-6.5 43V-6.0 47V-5.5 51V-5.0 56V-4.45 62V-4.0 68V-3.7 75V-3.3 82V-3.0 91V-2.8 100V-2.5 3.14 3.42 3.7 4.08 4.46 4.84 5.32 5.89 6.46 7.13 7.79 8.65 9.5 10.45 11.4 12.35 14.25 15.2 17.1 19 20.9 22.8 25.65 28.5 31.35 34.4 37.05 40.85 44.65 48.46 53.2 58.9 64.6 71.25 77.9 86.45 95 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100 100 50 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 2 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 62.2 69.2 76 1380 1260 1190 1070 970 890 810 730 660 605 550 500 454 414 380 344 304 285 250 225 205 190 170 150 135 125 115 110 95 90 80 70 65 60 55 50 45 (2). Valid provided that electrodes are kept at ambient temperature. (3). Measured under thermal equilibrium and DC test fonditions. (4). Standard Zener Voltage tolerance is ±5%. Add suffix “ A” for ±10% tolerance. E-mail: sales@cnmic.com Web Site: www.cnmic.com ZENER DIODE MZ1.0GD3V3 THRUMZ1.0GD100 RATING AND CHARACTERISTIC CURVES MZ1.0GD3V3 THRU MZ1.0GD100 FIG.1-ADMISSIBLE POWER DISSIPATION VERSUS AMBIENT TEMPERATURE Valid provided that leads are kept at ambient temperature or adistance of 10mm from case mA 240 FIG.2-BREAKDOWN CHARACTERISTICS Tj =constant (pulsed) W 1.0 3.9 200 IZ 4.7 Tj =25 ℃ 5.6 160 0.8 120 Ptot 6.8 Test Current Iz 100mA 8.2 10 12 5mA 80 0.6 40 0 0 0.4 1 2 3 4 5 6 7 8 9 10 VZ 11 12 13 14 15V 0.2 0 0 100 Tamb 200℃ FIG.3-BREAKDOWN CHARACTERISTICS Tj =constant (pulsed) mA 60 15 50 18 22 27 IZ FIG.4-BREAKDOWN CHARACTERISTICS Tj =constant (pulsed) ZMY... Tj =25 ℃ mA 20 56 ZMY... Tj =25 ℃ 40 Test Current Iz 30 5mA 33 39 47 20 10mA 10 68 IZ Test Current Iz 10mA 10 82 100 5mA 0 0 5 10 15 20 25 VZ 0 30 35 40 45 50V 0 50 100 VZ 150 200V E-mail: sales@cnmic.com Web Site: www.cnmic.com