MZ1.0PA9V1-28

SURFACE MOUNT GALSS PASSIVATED ZENER DIODE MZ1.0PM6.2-41 THRU MZI.0PM91V-2.0 FEATURES • • • • • • Zener Voltage Standy State Power 6.2 to 91.0 Volts 1.0 Watt Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Glass passivated chip junction Low Zener impedance Low regulation factor High temperature soldering guaranteed: 250℃/10 seconds at terminals Case: JEDEC DO-213AB molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750 Method 2026 Polarity: Red band denotes Zener diode and positive end (cathode) Mounting Position: Any Weight: 0.0046 ounce, 0.116 gram DO-213AB SOL DERABL END CATHODE BAND SOL DERABL END MECHANICAL DATA • • • • • Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified OPERATING JUNCTION AND STOPAGE TEMPERATURE RANGE:TJ, TSTG:-55℃ to +150℃ Type Device Marking Code Nominal Zener Voltage at IZT (Note1) (volts) 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 Test Current IZT (mA) 41.0 37.0 34.0 31.0 28.0 25.0 23.0 21.0 19.0 17.0 15.5 14.0 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.0 Maximum dynamic Impedance Z ZT at IZT (Ohms) 2.0 3.5 4.0 4.5 5.0 7.0 8.0 9.0 10.0 14.0 16.0 20.0 22.0 23.0 25.0 35.0 40.0 45.0 50.0 60.0 70.0 80.0 95.0 110.0 125.0 150.0 175.0 200.0 250.0 Z ZK at IZK (Ohms) Maximum DC Reverse Leakage current IZK (mA) 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 IR (μA) 50 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VR (Volts) 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 62.2 69.2 Maximum Surge Current (note2) IRM (mApk) 730 660 605 550 500 454 414 380 344 305 285 250 225 205 190 170 150 135 125 115 110 95 90 80 70 65 60 55 50 Maximum Forward Voltage Ar 200mA VF (Volts) 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 MZ1.0PA6V2-41 MZ1.0PA6V8-37 MZ1.0PA7V5-34 MZ1.0PA8V2-31 MZ1.0PA9V1-28 MZ1.0PA10V-25 MZ1.0PA11V-23 MZ1.0PA12V-21 MZ1.0PA13V-19 MZ1.0PA15V-17 MZ1.0PA16V-15.5 MZ1.0PA18V-14 MZ1.0PA20V-12.5 MZ1.0PA22V-11.5 MZ1.0PA24V-10.5 MZ1.0PA27V-9.5 MZ1.0PA30V-8.5 MZ1.0PA33V-7.5 MZ1.0PA36V-7.0 MZ1.0PA39V-6.5 MZ1.0PA43V-6.0 MZ1.0PA47V-5.5 MZ1.0PA51V-5.0 MZ1.0PA56V-4.5 MZ1.0PA62V-4.0 MZ1.0PA48V-3.7 MZ1.0PA75V-3.3 MZ1.0PA82V-3.0 MZ1.0PA91V-2.0 6V2-41 6V8-37 7V5-34 8V2-31 9V1-28 10V-25 11V-23 12V-21 13V-19 15V-17 16V-15.5 18V-14 20V-12.8 22V-11.5 24V-10.5 27V-9.5 30V-8.5 33V-7.5 36V-7.0 39V-6.5 43V-6.0 47V-5.5 51V-5.0 56V-4.5 62V-4.0 48V-3.7 75V-3.3 82V-3.0 91V-2.0 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 Notes: 1. 2. 3. Standard voltage tolerance is ±5%, suffix A ±10% Surge current is a non-repetitive,8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method Maximum steady state power dissipation is 1.0 watt at TT =75℃ E-mail: sales@cnmic.com Web Site: www.cnmic.com SURFACE MOUNT GALSS PASSIVATED ZENER DIODE MZ1.0PM6.2-41 THRU MZI.0PM91V-2.0 Zener Voltage Standy State Power 6.2 to 91.0 Volts 1.0 Watt RATING AND CHARACTERISTIC CURVES MZ1.0PM6.2-41 THRU MZ1.0PM91V-2.0 FIG.1-MAXIMUM CONTINUOUS POWER DISSIPATION 60 H z RESISTIVE O R INDUCTIVE L OAD 1.0 Zz, DYNAMIC ZENER IMPEDANCE, OHMS FIG.2-TYPICAL ZENER IMPEDANCE 1000 TJ =25 ℃ PM(AV), AVERAGE POWER DISSIPATION,WATTS 0.75 100 VZ=91V VZ=56V 0.5 10 VZ =30V 0.25 P .C. B.MOUNTED O N 0 .31×0.31×0.08"( 8 ×8 ×2 mm ) COPPER AREAS PADS 0 25 50 75 100 125 150 175 1 0.5 VZ=6.2V 10 100 500 IZT,ZENER TEST CURRENT,mA TERMINALS TEMPERATURE,℃ 10 INSRANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FOR SML4763 FIG.4- TYPICAL REVERSE CHARACTERISTICS 10 1 TJ =100 ℃ 1 PULSE WIDTH=300μ S 1% DUTY CYCLE 0.1 TJ =25℃ 0.1 TJ =25℃ 0.01 0 20 40 60 80 100 PERCENT OF RATED ZENER VOLTAGE,% 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL TEMPERATURE COEFFICIENTS 8Vz, TEMPERATURE COEFICIENT, mV/℃ 110 90 TESD at RATED IZT 70 50 30 10 0 0 10 20 30 40 50 60 70 80 90 100 Vz,ZENER VOLTAGE, VOLTS E-mail: sales@cnmic.com Web Site: www.cnmic.com